| 重复控制及其在变速非圆车削中的应用 |
| |
| 引用本文： | 吴丹,王先逵,易旺民,高杨.重复控制及其在变速非圆车削中的应用[J].中国机械工程,2004,15(5):446-449. |
| |
| 作者姓名： | 吴丹 王先逵 易旺民 高杨 |
| |
| 作者单位： | 清华大学精密仪器与机械学系,北京,100084 |
| |
| 基金项目： | 国家自然科学基金资助项目 (5 0 10 5 0 0 9)，十五国家科技攻关项目 (2 0 0 1BA2 0 5 B0 4) |
| |
| 摘 要： | 为了提高变速非圆车削中直线伺服单元的跟踪精度和鲁棒性 ,建立了变速非圆车削的进给驱动直线电机、运动控制目标函数、主轴变速、切削力等的数学模型 ,分析了主轴变速精度对直线伺服单元控制的影响。应用重复控制理论设计了适于直线伺服单元的重复控制器 ,给出了详细的设计过程和稳定性分析 ,对控制器的性能进行了仿真分析。结果表明 ,基于重复控制的直线伺服单元能很好地跟踪变速非圆车削中刀具运动的目标值 ,能抑制波动的切削力对跟踪精度的影响。
|
| 关 键 词： | 变速非圆车削 直线伺服单元 重复控制 跟踪精度 |
| 文章编号： | 1004-132Ⅹ(2004)05-0446-04 |
| 修稿时间： | 2003年1月23日 |
Repetitive Control and Its Applications to Variable Spindle Speed Noncircular Turning |
| |
| Wu Dan Wang Xiankui Yi Wangmin Gao Yang Tsinghua University,Beijing.Repetitive Control and Its Applications to Variable Spindle Speed Noncircular Turning[J].China Mechanical Engineering,2004,15(5):446-449. |
| |
| Authors: | Wu Dan Wang Xiankui Yi Wangmin Gao Yang Tsinghua University Beijing |
| |
| Affiliation: | Wu Dan Wang Xiankui Yi Wangmin Gao Yang Tsinghua University,Beijing,100084 |
| |
| Abstract: | In order to enhance the tracking and robust performances of linear servo unit in variable spindle speed noncircular turning, the feed driving linear motor model, desired trajectory function of tool motion control, variable spindle speed model and cutting force model had been built. Then, the effects of variable spindle speed accuracy on the linear servo unit was analyzed. Furthermore, the theory of repetitive control was used to design the controller available for the linear servo unit, whose design details and stability analysis were presented. Finally, simulation analysis of the controller performances was carried out. The results show that the linear servo unit with repetitive controller can track the desired trajectory of the tool motion and inhibit the effects of fluctuating cutting force on the tracking accuracy. |
| |
| Keywords: | variable spindle speed noncircular turning linear servo unit repetitive control |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
