|
|||||
|
|
| 喷射沉积柱状坯形状模型 | |
| 引用本文： | 曹福洋,李培杰,范洪波,崔成松,李庆春.喷射沉积柱状坯形状模型[J].材料科学与工艺,2003,11(1):50-54. |
| 作者姓名： | 曹福洋 李培杰 范洪波 崔成松 李庆春 |
| 作者单位： | 1. 清华大学,焊接馆210室,北京,100084;哈尔滨工业大学,材料工程学院,黑龙江,哈尔滨,150001 2. 清华大学,焊接馆210室,北京,100084 3. 哈尔滨工业大学,材料工程学院,黑龙江,哈尔滨,150001 |
| 摘 要： | 通过坐标跟踪法建立了沉积坏形状预测模型。该模型不但考虑沉积坯任何表面点身自位置变化对沉积效果的影响，同时考虑了该点温度和其它表面点位置对该点沉积效果的影响，其计算过程严格按照喷射成形的实际过程执行，可实时计算并记录沉积坯的形貌，并验证了计算效果。本文模型可用于多种工艺下喷射沉积坯的形状预测。 |
| 关 键 词： | 柱状坯 喷射沉积 数值模型 坐标跟踪 快速凝固 形状预测 金属材料 制备 成形工艺 |
| 文章编号： | 1005-0299(2003)01-0050-05 |
| 修稿时间： | 2001年5月8日 |
Shape modeling of spray formed aolumnar billets |
|
| Abstract: | Shape modeling of spray formed billets was established through tracing surface coordinates of the billets. Not only the influence of the moving position of any point on a billet surface on the deposited effect is considered, but also the influence of the temperature of the point and the positions of any other points on the billet surface on the deposited effect was respected. Billet surface coordinates are calculated according to the real process of spray forming strictly, shapes of spray formed billets can be computed at any spray time and under any spray condition, and the shape modeling was confirmed. The shape modeling in this paper is utilized to predict the geometry of the preform under various spray forming processing conditions. |
| Keywords: | Spray forming Numerical modeling Rapid solidification Tracing coordinates |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |