首页 | 本学科首页   官方微博 | 高级检索  
     

基于特征向量盲分离的多频微弱信号检测方法
引用本文:杨晓阔,王曙钊,王峻,刘鹏.基于特征向量盲分离的多频微弱信号检测方法[J].传感技术学报,2008,21(8).
作者姓名:杨晓阔  王曙钊  王峻  刘鹏
作者单位:空军工程大学理学院,西安,710051;空军工程大学理学院,西安,710051;空军工程大学理学院,西安,710051;空军工程大学理学院,西安,710051
基金项目:国家高技术研究发展计划(863计划)
摘    要:研究了低信噪比条件下混合信号的盲分离,针对实际探测的微弱信号常常是多个频率微弱信号共存的情形, 进行了利用特征向量盲分离检测多个频率周期性微弱信号的研究, 以便把利用特征向量盲分离的微弱信号检测应用于信号处理中微弱信号的提取.该方法首先建立混合信号阵元接收模型,利用多路传感器信号盲分离提取有用信号,达到微弱信号检测的目的.仿真和实测数据试验结果表明,此方法可检测出湮没在强噪声环境中的微弱信号的幅度和频率,在-30dB极低信噪比下恢复出了多个弱信号,具有很高的可靠性.

关 键 词:特征向量盲分离  多频微弱信号检测  信噪比  信号模型

A Method for Detection of Multi-Frequency Weak Signal Based on Vector Blind Source Separation
Yang Xiao-kuo,Wang Shu-zhao,Wang Jun,Liu Peng.A Method for Detection of Multi-Frequency Weak Signal Based on Vector Blind Source Separation[J].Journal of Transduction Technology,2008,21(8).
Authors:Yang Xiao-kuo  Wang Shu-zhao  Wang Jun  Liu Peng
Affiliation:Air-force Engineering University, Science College
Abstract:Blind Source Separation in the very low SNR circumstance is studied;Aiming at the actual case that there are several signals with different frequency from the sensors,the study of detection of multi-frequency weak signal by the Vector Blind Source Separation is performed,so as to extract the weak signal in the signal processing through application of weak signal detection based on Vector Blind Source Separation.The model of signal annihilated in the noise is firstly built,and then,mixtures from multi-sensors are separated to realize the useful signals.The simulations and experments show that the amplitude,frequency of weak signals blurred by high noise can be estimated,more than one signal simultaneously at very low SNR of-30 dB are recovered by the new method,which is of high reliability.
Keywords:vector blind source separation  multi-frequency weak signal detection  signal to noise ratio  signal model
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《传感技术学报》浏览原始摘要信息
点击此处可从《传感技术学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号