Pure and mixed gas CH4 and n-C4H10 sorption and dilation in poly(1-trimethylsilyl-1-propyne)

Pure and mixed gas n-C₄H₁₀ and CH₄ sorption and dilation in poly(1-trimethylsilyl-1-propyne) (PTMSP) are reported at temperatures ranging from −20 to 35 °C. The presence of n-C₄H₁₀ in the mixture considerably reduces CH₄ solubility. For example, CH₄ solubility (in the limit of zero CH₄ fugacity) at 25°C decreases from 4.0 (pure gas) to 0.78 cm³(STP)/(cm³ polymer atm) in the presence of n-C₄H₁₀ at an activity of 0.60. At −20 °C, CH₄ solubility decreases by almost an order of magnitude, from 10.2 (pure gas) to 1.22 cm³(STP)/(cm³ polymer atm) in the presence of n-C₄H₁₀ at an activity of 0.61. In contrast, n-C₄H₁₀ mixture sorption properties are not measurably affected by the presence of CH₄. The dual mode sorption model parameters for CH₄ and n-C₄H₁₀ in PTMSP were determined from pure and mixed gas sorption measurements, and this model can adequately describe the sorption data. The n-C₄H₁₀/CH₄ mixed gas solubility selectivity in PTMSP decreases as temperature increases and as n-C₄H₁₀ activity increases. For example, at 25 °C, the n-C₄H₁₀/CH₄ solubility selectivity decreases from 250 to 120 as n-C₄H₁₀ activity increases from 0.02 to 0.25. At −20 °C and an n-C₄H₁₀ activity of 0.24, the n-C₄H₁₀/CH₄ solubility selectivity is 590. Penetrant-induced volume dilation of PTMSP can be adequately modeled by assuming that all swelling is caused by penetrant molecules sorbed in the polymer's dense equilibrium region (i.e., the Henry's law region) during sorption. However, the best fit partial molar volumes in the Henry's law region for the dilation data are considerably lower than the penetrant partial molar volumes in liquids, suggesting that further theoretical efforts are needed to develop predictive models of volume dilation in high free volume glassy polymers.