首页 | 本学科首页   官方微博 | 高级检索  
     

催化裂化汽油吸附脱硫工艺研究
引用本文:陈焕章,李永丹,赵地顺.催化裂化汽油吸附脱硫工艺研究[J].化学工程,2006,34(7):1-5.
作者姓名:陈焕章  李永丹  赵地顺
作者单位:1. 天津大学,化工学院,天津,300072;河北科技大学,化学与制药工程学院,河北,石家庄,050018
2. 天津大学,化工学院,天津,300072
3. 河北科技大学,化学与制药工程学院,河北,石家庄,050018
基金项目:中国石油化工股份有限公司资助项目(101099)
摘    要:在固定床吸附装置上对催化裂化汽油进行吸附脱硫实验,考察了吸附脱硫工艺条件对催化裂化汽油硫质量分数、辛烷值及吸附剂单程寿命的影响。实验结果表明,吸附脱硫适宜的工艺条件为:吸附温度360℃,吸附压力0.3 MPa,氢气流量300 mL/m in,体积空速1.0 h-1。通过对吸附脱硫实验过程中的尾气分析,对催化裂化汽油吸附脱硫的机理进行了探讨。

关 键 词:催化裂化汽油  吸附  脱硫  辛烷值
文章编号:1005-9954(2006)07-0001-05

Study on adsorptive desulfurization of FCC gasoline
CHEN Huan-zhang,LI Yong-dan,ZHAO Di-shun.Study on adsorptive desulfurization of FCC gasoline[J].Chemical Engineering,2006,34(7):1-5.
Authors:CHEN Huan-zhang  LI Yong-dan  ZHAO Di-shun
Abstract:The experiment of adsorptive desulfurization for FCC gasoline was carried out in fixed bed adsorption(unit).The effects of the process conditions of adsorptive desulfurization on sulfur content of FCC gasoline,octane number and once-through life of adsorbent were investigated.The experimental results show that the preferable(conditions) for adsorptive desulfurization are adsorption temperature of 360 ℃,adsorption pressure of 0.3 MPa,(hydrogen) volumetric flow rate of 300 mL/min,volume space velocity of 1.0 h~(-1).By analyzing tail gas of adsorptive desulfurization experiment,the mechanism of adsorptive desulfurization of FCC gasoline is explained.
Keywords:FCC gasoline  adsorption  desulfurization  octane number
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号