首页 | 本学科首页   官方微博 | 高级检索  
     

引线键合劈刀Z轴运动信号分析
引用本文:甘海涛,高健,陈新.引线键合劈刀Z轴运动信号分析[J].半导体技术,2009,34(3).
作者姓名:甘海涛  高健  陈新
作者单位:广东工业大学机电工程学院,广州,510090;广东工业大学机电工程学院,广州,510090;广东工业大学机电工程学院,广州,510090
摘    要:劈刀是自动引线键合机的关键部件之一.采集和分析劈刀的运动信号对于研究和改进微电子封装设备的制造工艺技术具有重要意义.利用激光多普勒(Doppler)非接触式测量方法,通过有效的试验光路设计,提取劈刀在实际键合过程中的Z轴运动信号;对试验采集信号进行了详细的时城分析,包括位移、速度、加速度分析,结果表明,以上研究清楚地描述了键合过程中劈刀z轴运动的动态变化特性;最后,针对劈刀下落过程的搜索区域阶段(tip-offset)的运动干扰现象分析了其原因.

关 键 词:引线键合  劈刀  键合速度  非接触式测量  运动干扰

Z-Axis Movement Signal Analysis of Capillary for Wire Bonding
Gan Haitao,Gao Jian,Chen Xin.Z-Axis Movement Signal Analysis of Capillary for Wire Bonding[J].Semiconductor Technology,2009,34(3).
Authors:Gan Haitao  Gao Jian  Chen Xin
Affiliation:Faculty of Electromechanical Engineering;Guangdong University of Technology;Guangzhou 510090;China
Abstract:Capillary is the key component of the automatic wire bonder,the collection and analysis of the capillary movement signal have important significance on the improving and studying of the micro-electronics equipment manufacture and techniques.Through laser Doppler non-contact test method and effective optical design,the Z-axis movement signal of capillary was acquired from the actual thermosonic bonding.A detailed time domain analysis on the test signal was done,including displacement,velocity and acceleratio...
Keywords:wire bonding  capillary  bonding velocity  non-contact test  movement disturbance  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号