| 拉伸试验中的控制响应度问题研究 |
| |
| 引用本文： | 李秋英,伍康勉.拉伸试验中的控制响应度问题研究[J].理化检验(物理分册),1999,35(7):294-295. |
| |
| 作者姓名： | 李秋英 伍康勉 |
| |
| 作者单位： | [1]涟源钢铁集团有限公司培训中心 [2]涟源钢铁集团有限公司钢研所 |
| |
| 摘 要： | 在ＭＴＳ ＴｅｓｔＳｔａｒⅡ数控式电液伺服材料试验机上研究了用载荷速度控制进行拉伸试验时，控制响应度对性能指标的影响，分析了控制响应变影响性能指标的原因，提出必须对控制响应度加以限制，推荐测定有明显屈服现象金属材料的屈服性能指标时，控制响应度应使屈服平均应变速度不超过０．００２５／ｓ。
|
| 关 键 词： | 拉伸试验 载荷速度控制 控制响应度 金属 |
STUDY ON CONTROLLING RESPONSIVENESS IN TENSILE TESTING |
| |
| Li Qiuying,Wu KangmianLianyuan Iron and Steel Group Limited Company.STUDY ON CONTROLLING RESPONSIVENESS IN TENSILE TESTING[J].Physical Testing and Chemical Analysis Part A:Physical Testing,1999,35(7):294-295. |
| |
| Authors: | Li Qiuying Wu KangmianLianyuan Iron and Steel Group Limited Company |
| |
| Affiliation: | Li Qiuying Wu KangmianLianyuan Iron and Steel Group Limited Company |
| |
| Abstract: | Using MTS TestStar I digital-controlled electro-hydraulic servo material testing system, the ef-fect of controlling responsiveness on materials property indexes for tensile testing under load rate control was stud-ied. The results indicated that controlling responsiveness should be limited. It is recommended that controlling re-sponsiveness should be chosen so that average strain rate during yielding doesn't exceed 0. 0025/s when determin-ing yield property indexes for metallic materials that exibit discontinuous yielding. |
| |
| Keywords: | Tensile test Load rate control Controlling responsiveness |
| 本文献已被 CNKI 维普 等数据库收录！ |
