首页 | 本学科首页   官方微博 | 高级检索  
     

水乳性纸塑复膜胶的研究
引用本文:李俊 王瑞明 邓仕英 赵立英 周浪 刘长生. 水乳性纸塑复膜胶的研究[J]. 武汉化工学院学报, 2005, 27(5): 26-29
作者姓名:李俊 王瑞明 邓仕英 赵立英 周浪 刘长生
作者单位:武汉化工学院材料科学与工程学院,湖北武汉430074
摘    要:以丙烯酸丁酯(BA)和醋酸乙烯酯(VAc)为主要单体,采用乳液聚合法来制备纸塑复合粘合剂,通过电子拉力机、NDJ-5粘度计涂-4#杯等对粘合剂的剥离强度、粘度等性能进行了测试,探讨了单体配比、功能单体用量、单体保护剂、pH值缓冲剂、引发剂、乳化剂等对粘合剂性能的影响,结果表明粘合剂的剥离强度可达到0.1kN/m以上,油墨的转移率可达90%以上.

关 键 词:乳液聚合 纸塑复膜胶 功能单体
文章编号:1004-4736(2005)05-0026-04
收稿时间:2004-12-20
修稿时间:2004-12-20

The study of water-emulsion paper/plastic laminating adhesive
LI Jun,WANG Rui-ming,DENG Shi-ying,ZHAO Li-ying,ZHOU Lang,LIU Chang-sheng. The study of water-emulsion paper/plastic laminating adhesive[J]. Journal of Wuhan Institute of Chemical Technology, 2005, 27(5): 26-29
Authors:LI Jun  WANG Rui-ming  DENG Shi-ying  ZHAO Li-ying  ZHOU Lang  LIU Chang-sheng
Abstract:The multifunction composite-film adhesive was prepared by seed emulsion polymerization with buty1 acrylic and acetate as main monomers. The effects of active monomer, functional monomer, monomer-protective agent, pH buffer agent, initiator, emulsifier on the properties of adhesive were investigated. The peeling strength and viscosity were determined by the electro-pull machine, NDJ-5 viscometer 4#, etc. The peeling strength of resulted adhesive reaches 0.1 kN/m and the printing ink transfer rate reaches 90%.
Keywords:emulsion polymerization  paper/plastic laminating adhesive  functional monomer
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号