| SiC颗粒增强PTFE基复合材料磨损图的研究 |
| |
| 引用本文： | 张洪波,董允,宗贵龙,贾艳琴. SiC颗粒增强PTFE基复合材料磨损图的研究[J]. 机械工程材料, 2004, 28(1): 9-11 |
| |
| 作者姓名： | 张洪波 董允 宗贵龙 贾艳琴 |
| |
| 作者单位： | 1. 河北工业大学材料科学与工程学院,天津,300130
2. 河北工业大学继续教育学院,天津,300130 |
| |
| 基金项目： | 河北省教委基金资助项目(97222) |
| |
| 摘 要： | 研究了SiC颗粒增强PTFE基复合材料(PTFE／SiCp)在干摩擦条件下的磨损特性。对磨损表面进行了观察分析，建立了复合材料磨损机制转变图，对在不同磨损条件下的磨损机制进行了概括。结果表明，SiC颗粒增强PTFE基复合材料发生轻微磨损的主要机制是显微切削，发生严重磨损的主要机制是粘着磨损。
|
| 关 键 词： | PTFE基复合材料 干摩擦 磨损机理 磨损图 |
| 文章编号： | 1000-3738(2004)01-0009-03 |
Wear Map of SiC Particle Filled PTFE Composite under Dry Friction |
| |
| ZHANG Hong-bo,DONG Yun,ZONG Gui-long,JIA Yan-qin. Wear Map of SiC Particle Filled PTFE Composite under Dry Friction[J]. Materials For Mechanical Engineering, 2004, 28(1): 9-11 |
| |
| Authors: | ZHANG Hong-bo DONG Yun ZONG Gui-long JIA Yan-qin |
| |
| Abstract: | The tribological properties of PTFE/SiC_P composite sliding against 45 steel were investigated. Through careful analysis of wear surface, the wear mechanism transition diagram of PTFE/SiC_P composite under dry friction was constructed. It is suggested that the dominate mechanism of the PTFE/SiC_P composite under mild wear conditions is micro-cutting, whereas under severe wear conditions it is adhesion. In the transition region, PTFE/SiC_P composite undergoes micro-cutting and adhesion. |
| |
| Keywords: | PTFE/SiC_P composite dry friction wear mechanism wear map |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
