| ADAMS与UG、SolidWorks的数据交换实践 |
| |
| 引用本文： | 郁飞鹏,贾鸿社. ADAMS与UG、SolidWorks的数据交换实践[J]. 现代制造工程, 2005, 0(10): 37-39 |
| |
| 作者姓名： | 郁飞鹏 贾鸿社 |
| |
| 作者单位： | 1. 河南科技大学车辆与动力工程学院,洛阳,471003
2. 中国一拖集团公司技术中心,洛阳,471039 |
| |
| 摘 要： | 利用UG、SolidW orks等三维CAD软件强大的建模功能,将建好的模型导入ADAMS,以弥补ADAMS建模能力弱的不足;讨论了ADAMS与UG、SolidW orks等CAD软件的数据交换过程。
|
| 关 键 词： | ADAMSUGSolidWorks数据交换 |
| 文章编号： | 1671-3133(2005)10-0037-03 |
| 修稿时间： | 2005-03-10 |
Data exchange between ADAMS and CAD software UG and SolidWorks |
| |
| Yu Feipeng,Jia Hongshe. Data exchange between ADAMS and CAD software UG and SolidWorks[J]. Modern Manufacturing Engineering, 2005, 0(10): 37-39 |
| |
| Authors: | Yu Feipeng Jia Hongshe |
| |
| Affiliation: | Yu Feipeng~1,Jia Hongshe~2 |
| |
| Abstract: | CAD software such as UG and SolidWorks has powerful function of modeling,but ADAMS has poor function of modeling.Importing the models built in CAD into ADAMS can strengthen ADAMS.Discusses the process of data exchange between ADAMS and CAD software UG and SolidWorks. |
| |
| Keywords: | ADAMS UG SolidWorks Data exchange |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
