CdZnTe Substrate Surface Preparation Technology at ASELSAN,Inc. for Molecular Beam Epitaxy Growth of High Quality HgCdTe Epilayers

High quality CdZnTe substrates with 4% ZnTe mole fraction are used for epitaxial growth of HgCdTe infrared detector layers. Molecular Beam Epitaxy (MBE) growth of HgCdTe epilayers requires high quality surface layer with sub-nanometer surface roughness values as well. We report on the development of a CdZnTe substrate surface preparation process for MBE growth of high quality HgCdTe epilayers. Surface preparation processes were performed on both commercially available CdZnTe substrates and substrates obtained from in-house grown CdZnTe boules. We developed a multi-step substrate surface processing flow to achieve sub-nanometer surface roughness, low total thickness variation (TTV), and wax or slurry residue free CdZnTe substrate surfaces. Each process step was optimized with the aim of removing the subsurface damage caused by the previous process step; so that we reduce the amount of damaged layer needed to be etched prior to epitaxy. Our developed surface preparation process can be applicable to commercially available CdZnTe substrates with high surface roughness and high TTV. This process was also optimized for as-cut CdZnTe slices. We are capable of processing typically 25 mm?×?25 mm CdZnTe substrates with achievable surface roughness values (R_rms) down to below 0.5 nm.