| 基于LabVIEW和CAN总线的电动汽车充电站监控系统设计 |
| |
| 引用本文： | 刘永相,惠富会,徐瑞林,陈涛,郑可,孙洪亮,冯凌,欧习洋. 基于LabVIEW和CAN总线的电动汽车充电站监控系统设计[J]. 电测与仪表, 2011, 0(11): 41-44 |
| |
| 作者姓名： | 刘永相 惠富会 徐瑞林 陈涛 郑可 孙洪亮 冯凌 欧习洋 |
| |
| 作者单位： | 重庆电力科学试验研究院 |
| |
| 基金项目： | 重庆市电力公司科技项目(渝电科技44号) |
| |
| 摘 要： | 建立完善的充电站监控系统是确保电动汽车充电站安全高效运行的有效措施.本文采用CAN总线构建了充电站监控通信网络,将内部各充电桩的数据通过CAN网络传输给ACUSB-132B接口转换卡,再由USB接口与监控上位机相连,并在上位主机上利用LabVIEW设计出监控软件.通过在某电动汽车充电站试验运行,本文设计的充电站监控系统...
|
| 关 键 词： | 电动汽车充电站 CAN总线 LabVIEW 监控 |
Design of Supervisory Control System for Electric Vehicle Charge-station Based on LabVIEW and CAN Bus |
| |
| LIU Yong-xiang,HUI Fu-hui,XU Rui-lin,CHEN Tao,ZHENG Ke,SUN Hong-liang,FENG Ling,OU Xi-yang. Design of Supervisory Control System for Electric Vehicle Charge-station Based on LabVIEW and CAN Bus[J]. Electrical Measurement & Instrumentation, 2011, 0(11): 41-44 |
| |
| Authors: | LIU Yong-xiang HUI Fu-hui XU Rui-lin CHEN Tao ZHENG Ke SUN Hong-liang FENG Ling OU Xi-yang |
| |
| Affiliation: | (Chongqing Electric Power Test & Research Institute,Chongqing 401123,China) |
| |
| Abstract: | A perfect supervisory control system for electric vehicles charge-station need to be established to ensure the safe and efficient operation.In this paper,charge-station communication network is constructed by CAN bus,charge spots datas in charge-station are transmitted to ACUSB-132B CAN cards through CAN bus,then datas are converted to USB interfaces which connect to monitoring host computer,and monitoring software is designed by the use of LabVIEW.Through a experiment test of electric vehicle charge-station,the results show that the designed supervisory control system for electric vehicles charge-station is reasonable,communication network is fast and reliable,monitoring software has good interactive features,which can effectively ensure charge-station’s security and stability. |
| |
| Keywords: | electric vehicles charge-station CAN bus LabVIEW monitoring |
| 本文献已被 CNKI 等数据库收录！ |
|
