| 超临界锅炉启动分离器制造工艺研究 |
| |
| 引用本文： | 蔡延斌,唐勇. 超临界锅炉启动分离器制造工艺研究[J]. 电站系统工程, 2006, 22(4): 55-56 |
| |
| 作者姓名： | 蔡延斌 唐勇 |
| |
| 作者单位： | 哈尔滨锅炉厂有限责任公司;绥棱县电业局 |
| |
| 摘 要： | 阐述超临界锅炉中启动分离器的结构特点、制造要求,以及制造的难度及解决方案,如切向管孔的加工、切向管接头坡口的加工、切向管接头的焊接、环缝的焊接保护等问题。
|
| 关 键 词： | 超临界锅炉 启动分离器 制造工艺 切向管接头 |
| 文章编号： | 1005-006X（2006）04-0055-02 |
| 收稿时间： | 2006-01-20 |
| 修稿时间： | 2006-01-20 |
The Technique Research of Startup Separator in Super-critical Boiler |
| |
| CAI Yan-bin,TANG Yong. The Technique Research of Startup Separator in Super-critical Boiler[J]. Power System Engineering, 2006, 22(4): 55-56 |
| |
| Authors: | CAI Yan-bin TANG Yong |
| |
| Abstract: | The structure characteristic of startup separator in super-critical boiler, the requirement and the difficulties in fabrication, such as the manufacture of hole and the groove of the tangential tube and the welding of tube and the protection of circle seam, etc. are introduced. |
| |
| Keywords: | super-critical boiler startup separator manufacturing technique tangential tube |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
