首页 | 本学科首页   官方微博 | 高级检索  
     

NBR/PVC热塑性弹性体耐热老化性能研究
引用本文:严海彪,石文鹏,陈艳林.NBR/PVC热塑性弹性体耐热老化性能研究[J].现代塑料加工应用,2004,16(2):6-8.
作者姓名:严海彪  石文鹏  陈艳林
作者单位:1. 湖北工学院化工系,武汉,430068
2. 常州轻工职业技术学院轻工系,213004
基金项目:湖北省教育厅科技创新项目(编号 2000D04001)
摘    要:考察了硫化体系、PVC聚合度、DOP用量、抗氧剂种类及用量对丁腈橡胶/聚氯乙烯(NBR/PVC)热塑性弹性体(TPE)的耐热老化性能的影响。试验结果表明:NBR/PVC:的质量比为70:30时,酚醛树脂硫化体系制备的TPE的耐热老化性能最好;增加PV(:的聚合度,TPE的耐热老化性能提高;DOP用量越大。TPE的耐热老化性能越差;抗氧剂2246对TPE的耐热老化性能最好,其最佳用量为2.0份。

关 键 词:丁腈橡胶  聚氯乙烯  热塑性弹性体  DOP  抗氧剂  质量分数
修稿时间:2003年11月24

STUDY ON THE HEAT AGING PROPERTIES OF NBR/PVC TPE
Yan Haibiao Shi Wenpeng Chen Yanlin.STUDY ON THE HEAT AGING PROPERTIES OF NBR/PVC TPE[J].Modern Plastics Processing and Applications,2004,16(2):6-8.
Authors:Yan Haibiao Shi Wenpeng Chen Yanlin
Affiliation:Yan Haibiao~1 Shi Wenpeng~2 Chen Yanlin~1
Abstract:The influences of curing system, degree of polymerization of PVC, amount of DOP, types and amountof antioxidant on the heat aging properties of NBR/PVC TPE were studied. The experimental resultsshowed that the optimization heat aging properties of NBR/PVC(70/30) TPE cured with phenol--formaldehyde resin were obtained. The heat aging properties of TPE were improved when degree of polymerization of PVC was increased. And the more the amount of DOP was, the worse the heat aging properties was. The optimization heat aging properties were obtained when antioxidant 2246 was used and the optimization amount was 2 phr.
Keywords:nitrile butadiene rubber  polyvinyl chloride  thermoplastic elastomer  blend  property  heat aging
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号