| 基于UG的C型钳有限元分析及优化设计 |
| |
| 引用本文： | 谢晓华.基于UG的C型钳有限元分析及优化设计[J].机电产品开发与创新,2010,23(4):111-112. |
| |
| 作者姓名： | 谢晓华 |
| |
| 作者单位： | 永州职业技术学院,湖南,永州,425100 |
| |
| 摘 要： | 应用UGNX7.0的＂高级仿真＂模块,建立C型钳的有限元模型,通过解算器NXNASTRAN对有限元模型进行分析求解,得到C型钳在额定载荷时的位移变形和应力分布情况,再根据设计要求对零件参数进行优化,使C型钳的结构既满足设计要求,又达到体积小、成本低的目的。
|
| 关 键 词： | UG 有限元 C型钳 优化 |
C-clamp on the Finite Element Analysis and Optimization Based on UG |
| |
| XIE Xiao-Hua.C-clamp on the Finite Element Analysis and Optimization Based on UG[J].Development & Innovation of Machinery & Electrical Products,2010,23(4):111-112. |
| |
| Authors: | XIE Xiao-Hua |
| |
| Affiliation: | XIE Xiao-Hua (Yongzhou Vocational and Technical College, Yongzhou Hunan 425100, China) |
| |
| Abstract: | Application of UG NX7.0 ＇Advanced Simulation＇ module, the establishment of C -clamp the finite element model, by NX NASTRAN solver on finite element analysis model solved by C-clamp at rated load, the displacement and stress distribution of deformation , then according to the part design parameters to optimize, C-clamp structure that meets design requirements, we reach the small size, low cost of Mudi. |
| |
| Keywords: | UG |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
