注塑制品常见缺陷分析及改善措施 |
| |
引用本文: | 邱志文.注塑制品常见缺陷分析及改善措施[J].装备制造技术,2010(3):139-140. |
| |
作者姓名: | 邱志文 |
| |
作者单位: | 河源职业技术学院,广东,河源,517000 |
| |
摘 要: | 对塑料注塑制品常见缺陷进行了原因分析,如填充不足、飞边、空隙、气泡、接合线等,并有针对性地提出了改善措施。
|
关 键 词: | 注塑制品 缺陷 改善 措施 |
Common Defects in Injection-molded Parts Analysis and Improvement Measures |
| |
Authors: | QIU Zhi-wen |
| |
Affiliation: | Heyuan Polytechnic;Heyuan Guangdong 517000;China |
| |
Abstract: | This paper products to plastic injection molding analysis of common causes of defects,such as insufficient filling,flying edge,gaps,bubbles,bonding wire,etc.,and targeted improvement measures put forward. |
| |
Keywords: | injection products defect improvements measure |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|