| 电液位置伺服系统的抖振消弱滑模控制 |
| |
| 引用本文： | 靳宝全,熊诗波,程珩.电液位置伺服系统的抖振消弱滑模控制[J].振动．测试与诊断,2011,31(3). |
| |
| 作者姓名： | 靳宝全 熊诗波 程珩 |
| |
| 作者单位： | 太原理工大学机械电子工程研究所,太原,030024 |
| |
| 摘 要： | 比例滑模策略保留了线性控制的某些优点,但抖振的存在不仅会降低控制精度,甚至会激发系统的未建模动态或引起机械谐振,严重制约了比例滑模控制在电液位置系统中的应用.为避免抖振对系统精度与稳定性的影响,提出采用模糊模型,根据切换函数及其导数的状态自调整比例滑模切换增益,以柔化控制信号.试验结果表明,通过模糊理论实现增益自调整,能有效降低抖振,既实现了高精度控制,又保留了滑模策略抗参数摄动及抗扰动能力强的特点.
|
| 关 键 词： | 抖振 电液位置伺服系统 模糊 比例滑模 增益自调整 |
Chattering Reduction Sliding Mode Control for Electro-Hydraulic Position Servo System |
| |
| Jin Baoquan,Xiong Shibo,Cheng Hang.Chattering Reduction Sliding Mode Control for Electro-Hydraulic Position Servo System[J].Journal of Vibration,Measurement & Diagnosis,2011,31(3). |
| |
| Authors: | Jin Baoquan Xiong Shibo Cheng Hang |
| |
| Affiliation: | Jin Baoquan,Xiong Shibo,Cheng Hang (Research Institute of Mechano-Electronic Engineering,Taiyuan University of Technology Taiyuan,030024,China) |
| |
| Abstract: | The proportion sliding mode strategy retains the linear control advantages,but the presence of buffeting will reduce the control precision,even stimulate the system unmodeled dynamics or cause mechanical resonance.These deficiencies seriously restrict the application of the proportion of sliding mode control in electro-hydraulic position system.In order to avoid chattering influence on the system accuracy and stability,self-tuning sliding mode switching gain is designed to soften the control signal,accordin... |
| |
| Keywords: | buffeting electro-hydraulic position system fuzzy proportion sliding mode gain self-adjusting |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《振动．测试与诊断》浏览原始摘要信息 |
|
点击此处可从《振动．测试与诊断》下载全文 |
|
