SODA: A new method of in-scene atmospheric water vapor estimation and post-flight spectral recalibration for hyperspectral sensors: Application to the HyMap sensor at two locations

A new method of estimating per-pixel atmospheric column water vapor (ACWV) and potential differences in the reported band center wavelengths of the HyMap sensor has been developed. The new method uses variations of a second order derivative algorithm (SODA) to assess the impact of atmospheric residual features on calculated surface reflectance spectra after atmospheric compensation. The SODA method provides an alternative to the current band ratio techniques of ACWV estimation and also allows the same form of algorithm to be used for the estimation of possible band shifts. A comparison of in-situ measured surface reflectance at two field sites in Western Australia demonstrates improvement in the resulting spectra when post-flight updates are made to the reported HyMap band center wavelengths and applied during the atmospheric compensation process. The same SODA methodology was varied to estimate the ACWV on a per-pixel basis and found to significantly reduce the appearance of the underlying surface structure on the resulting ACWV images as well as improve the overall accuracy of the estimation. The ACWV estimated from the HyMap imagery at the two field sites was found to agree with in-situ atmospheric ACWV measurements to within 2% and represented a two fold increase in accuracy over a 3 band ratio Continuum Interpolated Band Ratio (CIBR) technique of ACWV estimation.