| 低速运转气膜机械密封端面波度和锥度对其密封性能的影响 |
| |
| 引用本文： | 李伟,宋鹏云,赵越,曹登峰. 低速运转气膜机械密封端面波度和锥度对其密封性能的影响[J]. 润滑与密封, 2006, 0(5): 93-97 |
| |
| 作者姓名： | 李伟 宋鹏云 赵越 曹登峰 |
| |
| 作者单位： | 昆明理工大学生物与化学工程学院装控系,云南昆明,650224;曲靖卷烟厂,云南曲靖,655000 |
| |
| 基金项目： | 云南省自然科学基金;云南省高校教育教学科研带头人资助项目 |
| |
| 摘 要： | 气体润滑机械密封端面周向波度和径向锥度是影响密封低速运转性能的重要参数。以螺旋槽气体润滑机械密封为研究对象,采用有限单元法分别对周向波度、径向锥度对其低速运转性能的影响规律进行了分析研究。理论分析表明:在低速运转条件下,波度幅值及其起始角对螺旋槽气膜密封的各项性能都具有很大影响;密封端面正锥度的增加能使密封气膜刚度显著提高,但同时也使密封的泄漏量有所增加。
|
| 关 键 词： | 波度 锥度 气膜密封 有限单元法 |
| 文章编号： | 0254-0150(2006)5-093-5 |
| 收稿时间： | 2005-10-13 |
| 修稿时间： | 2005-10-13 |
Influence of Waviness and Taper of Seal Faces on the Operating Performance of Slow Speed Gas Face Seal |
| |
| Li Wei,Song Pengyun,Zhao Yue,Cao Dengfeng. Influence of Waviness and Taper of Seal Faces on the Operating Performance of Slow Speed Gas Face Seal[J]. Lubrication Engineering, 2006, 0(5): 93-97 |
| |
| Authors: | Li Wei Song Pengyun Zhao Yue Cao Dengfeng |
| |
| Affiliation: | 1. Faeulty of Biological and Chemical Engineering, Kunming University of Science and Technology, Kunming Yunnan 650224, China; 2. Qujing Cigarette Factory, Qujing Yunnan 655000, China |
| |
| Abstract: | Circular waviness and radial taper of gas face seal are two important parameters that have important effects on seal's operating performance.As a typical example,the spiral grooved gas face seal was analyzed with the consideration of seal face's waviness and taper through finite element method.At slow speed,amplitude and origination angle of waviness have great effects on spiral grooved gas face seal's operating performances.With the increasing of seal face's positive taper,the stiffness of gas film is obviously increased,but the leakage of seal is also increased. |
| |
| Keywords: | waviness taper gas face seal finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
