| 轴类零件粗糙度参数模糊设计系统研究 |
| |
| 引用本文： | 潘玉良,吴立群,陈国金,李沛同.轴类零件粗糙度参数模糊设计系统研究[J].组合机床与自动化加工技术,2001(6):13-16. |
| |
| 作者姓名： | 潘玉良 吴立群 陈国金 李沛同 |
| |
| 作者单位： | 杭州电子工业学院机电工程分院, |
| |
| 基金项目： | 浙江省自然科学基金资助 |
| |
| 摘 要： | 详细阐述了基于模糊集设计粗糙度参数系统的两个关键技术：粗糙度设计因素确定和推进规则设计。文中建立设计因素的隶属度函数、置信矩阵，选用欧氏距离作为模式识别原则，编写模糊设计软件系统。减速轴类等零件粗糙度参数设计结果表明系统设计合理、使用可靠。
|
| 关 键 词： | 模糊设计 粗糙度参数 轴类零件 CAD |
| 文章编号： | 1001-2265(2001)05-0013-04 |
| 修稿时间： | 2001年2月15日 |
Study of fuzzy design system of shaft roughness |
| |
| PAN Yuliang,Wu Liqun,Chen Guojin,LI Peitong.Study of fuzzy design system of shaft roughness[J].Modular Machine Tool & Automatic Manufacturing Technique,2001(6):13-16. |
| |
| Authors: | PAN Yuliang Wu Liqun Chen Guojin LI Peitong |
| |
| Affiliation: | PAN Yuliang WU Liqun CHEN Guojin LI Peitong |
| |
| Abstract: | In this paper, the fuzzy sets are applied to the designing of roughness parametersof shaft parts. Two key problems of how to determine fuzzy factors and how to express fuzzy logical rules are introduced in detail. Designing matrixes are defined to measure fuzzy of factors. A principle of min-distances is quoted as a fuzzy mode judging strategy. Fuzzy designing software has been developed. Some typical examples prove the design system reliable. |
| |
| Keywords: | fuzzy design roughness parameters shaft parts |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
