首页 | 本学科首页   官方微博 | 高级检索  
     

省煤器腐蚀穿孔泄漏原因分析
引用本文:郑文龙,周喜政. 省煤器腐蚀穿孔泄漏原因分析[J]. 石油化工腐蚀与防护, 2000, 17(1): 10-12,21
作者姓名:郑文龙  周喜政
作者单位:上海材料研究所!上海市 200437,上海材料研究所!上海市 200437,上海材料研究所!上海市 200437,上海材料研究所!上海市 200437,大连石油化工公司!辽宁省大连市 116031,大连石油化工公司!辽宁省大连市116031
摘    要:经过对ND钢省煤器管束泄漏管子的宏观及微观分析,表明管子泄漏是首先从焊缝开始的硫酸露点腐蚀引起的;同排同位置的5根管子泄漏是由于其中一根管子发生硫酸露点腐蚀后穿孔喷水所引起的高温稀硫酸腐蚀的结果。文章分析了失效原因并提出了建议与措施。

关 键 词:ND钢  硫酸露点腐蚀  高温稀硫酸腐蚀

Analysis of Causes of Economizer Corrosion Failure
Zheng Wenlong,Zhou Xizheng,Wei Yun,etc.. Analysis of Causes of Economizer Corrosion Failure[J]. Petrochemical Corrosion and Protection, 2000, 17(1): 10-12,21
Authors:Zheng Wenlong  Zhou Xizheng  Wei Yun  etc.
Abstract:The macro and micro analysises of the leaking tubes of the ND steel economizer showed that the leakage was caused by the sulfuric acid dew point corrosion which started from the weld seam. The leakage of 5 tubes in the same row was the result of high-temperature dilute sulfuric acid corrosion initiated by the water spray of one of tubes due to the sulfuric acid dew point corrosion failure. The causes of failure were analyzed and preventive measures were presented.
Keywords:ND steel   sulfuric acid dew point corrosion   high-temperature dilute sulfuric acid corrosion  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号