| 高速铣削对铝合金零件表面粗糙度影响的试验研究 |
| |
| 引用本文： | 于信伟.高速铣削对铝合金零件表面粗糙度影响的试验研究[J].煤矿机械,2007,28(12):48-49. |
| |
| 作者姓名： | 于信伟 |
| |
| 作者单位： | 黑龙江科技学院,哈尔滨,150027 |
| |
| 摘 要： | 采用单因素试验方法,研究硬质合金刀具高速铣削铝合金材料时切削参数对加工表面粗糙度的影响。通过试验,得到了切削速度、进给量和切削深度对表面粗糙度的影响规律,并分析原因,为指导企业生产提供了一定的试验依据。
|
| 关 键 词： | 高速铣削 表面粗糙度 切削用量 铝合金 |
| 文章编号： | 1003-0794（2007）12-0048-02 |
| 修稿时间： | 2007-08-21 |
Experimental Research Influences of High Speed Milling on Aluminum Alloy Workpiece Surface Roughness |
| |
| YU Xin-wei.Experimental Research Influences of High Speed Milling on Aluminum Alloy Workpiece Surface Roughness[J].Coal Mine Machinery,2007,28(12):48-49. |
| |
| Authors: | YU Xin-wei |
| |
| Affiliation: | Heilongjiang Scientific and Technical Institute, Harbin 150027, China |
| |
| Abstract: | The influences of cutting parameters with cemented carbide cutters on aluminum alloy workpieces surface roughness are researched through single factor experiments, which are obtained on high speed milling. The laws of surface roughness by changing cutting speed, feed rate, cutting depth, and the reasons are analyzed. These provided experimental bases for enterprises. |
| |
| Keywords: | high speed milling surface roughness cutting parameters aluminum alloy |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
