| 变径薄壁零件粘性介质外压缩径变形分析 |
| |
| 引用本文： | 高铁军,王忠金. 变径薄壁零件粘性介质外压缩径变形分析[J]. 锻压技术, 2009, 34(1) |
| |
| 作者姓名： | 高铁军 王忠金 |
| |
| 作者单位： | 1. 沈阳航空工业学院,航空宇航工程学院,辽宁,沈阳,110136
2. 哈尔滨工业大学,材料科学与工程学院,黑龙江,哈尔滨,150001 |
| |
| 摘 要： | 针对变径薄壁零件粘性介质外压缩径方法,采用理论和有限元方法分析了粘性介质压力场分布、坯料几何形状及应力与应变的变化,并与试验结果进行对比.研究结果表明,粘性介质适应坯料失稳褶皱形貌产生不均匀的压力场,并在较高压力条件下消除褶皱;试件壁厚减薄,最大减薄率为4.3%,变形方式由压缩类变形向伸长类变形转变.
|
| 关 键 词： | 外压缩径 变径薄壁零件 粘性介质 变形方式 |
Analysis of deformation in viscous medium outer pressure necking for thin-wall parts with variable diameter section |
| |
| GAO Tie-jun,WANG Zhong-jin. Analysis of deformation in viscous medium outer pressure necking for thin-wall parts with variable diameter section[J]. Forging & Stamping Technology, 2009, 34(1) |
| |
| Authors: | GAO Tie-jun WANG Zhong-jin |
| |
| Affiliation: | 1.School of Aerospace Engineering;Shenyang Institute of Aeronautical Engineering;Shenyang 110136;China;2.School of Materials Science and Engineering;Harbin Institute of Technology;Harbin 150001;China |
| |
| Abstract: | In consideration of necking method of thin-wall parts with variable diameter under viscous medium outer pressure,the pressure field distribution in the viscous medium,the geometrical shape and the stress and strain variation in the specimen were analyzed by theoretical method and finite element method,which were compared with experimental results.Research results show that the viscous medium can give rise to the nonuniform pressure distribution and adapt to variation of wrinkles of the buckling specimen,whi... |
| |
| Keywords: | outer pressure necking thin-wall variable diameter parts viscous medium deformation mode |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
