Measurements of induced activity in concrete by secondary particles at forward direction produced by intermediate energy heavy ions on an Fe target |
| |
Authors: | T. Ogawa M.N. MorevT. Iimoto T. Kosako |
| |
Affiliation: | a Department of Nuclear Engineering and Management, Graduate School of Engineering, University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-8654, Japan b Department of Fuel Cycle Facilities Safety, Laboratory of Radioactive Wastes, Science and Engineering Center for Nuclear and Radiation Safety, d.2/8, korp. 5, ul. Malaya Krasnoselskaya, Moscow 107140, Russia c Division of Environment Health and Safety, University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-8654, Japan d Nuclear Professional School, Graduate School of Engineering, University of Tokyo, Shirakata-shirane, Tokai, Ibaraki 319-1188, Japan |
| |
Abstract: | Spallation and neutron capture reaction rate distributions were measured using activation detectors inside a 90-cm thick ordinary concrete pile exposed to a field of secondary particles escaping a thick (stopping length) iron target bombarded with various intermediate energy ions, 230 MeV/u He, 400 MeV/u C, and 800 MeV/u Si. Activation detectors of aluminum, bismuth, gold, and gold covered with cadmium were inserted at various depths in the concrete pile. In addition, the distributions of activation reaction rate were simulated by FLUKA and PHITS Monte-Carlo codes. Generally, comparison of measured and calculated reaction rates show agreement within a factor of two. The experimental data will be useful for benchmarking Monte-Carlo radiation transport simulation code capabilities in estimating radioactivity induced in accelerator radiation shielding. |
| |
Keywords: | Ordinary concrete Spallation reaction Neutron capture reaction Intermediate energy Heavy ion Activation method |
本文献已被 ScienceDirect 等数据库收录! |
|