Beam stability improvement of the HIMAC synchrotron using a feed-forward system for magnet power supplies |
| |
Authors: | K. Katagiri T. FurukawaK. Mizushima H. UchiyamaE. Takeshita T. HimukaiS. Sato Y. IwataT. Shirai K. Noda |
| |
Affiliation: | a National Institute of Radiological Sciences (NIRS), 4-9-1 Anagawa, Inage-ku, Chiba 263-8555, Japan b Accelerator Engineering Corporation (AEC), 3-8-5 Konakadai, Inage, Chiba 263-0043, Japan |
| |
Abstract: | In order to realize a precise dose distribution in heavy-ion cancer therapy, high beam stability is required for the accelerator complex. Owing to load fluctuation caused by the upper ring, which is one of the two rings in HIMAC, current dips of ≈5-10 Hz were observed in the power supply for the bending/quadrupole magnet of the other lower ring. The parameters of the beam stability, such as the spill variation, the beam position, and the size, were adversely affected by the current dips. In order to suppress these current dips, we developed a new feed-forward system in the magnet power supply. We verified the performance of the feed-forward system by measuring the suppression of the current dips. We also performed beam experiments to measure the variation of the horizontal tune and the structure of the beam spill, which is slowly extracted by the resonance method. The experimental result showed that the current dips were successfully reduced by the system to ΔI/I ∼ 10−6. It was also confirmed that the horizontal tune and the spill structure could be stabilized by the current dip suppression. |
| |
Keywords: | Beam stability Scanning irradiation Synchrotron Heavy-ion therapy |
本文献已被 ScienceDirect 等数据库收录! |
|