首页 | 本学科首页   官方微博 | 高级检索  
     

基于CFD的可倾瓦轴承静动特性研究
引用本文:吕真,张继革,顾卫国. 基于CFD的可倾瓦轴承静动特性研究[J]. 机械传动, 2012, 0(9): 1-3
作者姓名:吕真  张继革  顾卫国
作者单位:上海交通大学机械与动力工程学院
基金项目:国家“973”计划资助项目(2009CB724302);中国博士后科学基金(20110490717)
摘    要:目前对于可倾瓦轴承的静动特性研究方法,主要是先研究单块瓦片的特性,再通过瓦片子系统的叠加得到轴承整体特性,在计算中忽略了瓦间间隙及瓦块相互之间的流场影响。用瓦块独立计算模型模拟理论计算中只考虑轴瓦与轴颈间隙流场的情况,整体计算模型考虑轴承瓦间间隙的影响,在Fluent软件中计算两种模型的静动特性参数,并进行对比和分析。计算结果表明,瓦间间隙对轴承流场的影响不能忽略,尤其是在涉及温度场计算时,瓦块独立计算模型计算的结果与整体模型计算结果相差很大。

关 键 词:可倾瓦轴承  CFD计算方法  静动特性系数

Research on Tilting-pad Bearing Static and Dynamic Characteristic based on CFD
Lv Zhen Zhang Jige Gu Weiguo. Research on Tilting-pad Bearing Static and Dynamic Characteristic based on CFD[J]. Journal of Mechanical Transmission, 2012, 0(9): 1-3
Authors:Lv Zhen Zhang Jige Gu Weiguo
Affiliation:Lv Zhen Zhang Jige Gu Weiguo(School of Mechanic Engineering,Shanghai Jiao Tong University,Shanghai 200240,China)
Abstract:For now the research methods of tilting-pad bearing static and dynamic characteristics,the characteristics of single pad is mainly studied,and through the superposition of single pads characteristics bearing overall property is got,the method ignores the gap between pads.In simulation theoretical calculation with pad independent calculation model flow field situation between pads and journal is not considered.Static and dynamic characteristic parameters are calculated by Fluent software,in the whole calculation model in the influence of the gap between bearing pads is considered and compare the results are compared.The calculation results show that,the influence of gap between pads on flow field of the bearing can’t be ignored,especially involving the temperature field.The pad independent calculation model calculation results and the whole model calculation results are very different.
Keywords:Tilting-pad bearings CFD calculation method Coefficient of static and dynamic characteristic
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号