| Cu-13.5%Sn合金雾化液滴凝固过程模拟 |
| |
| 引用本文： | 王晓峰,赵九洲,何杰,王江涛. Cu-13.5%Sn合金雾化液滴凝固过程模拟[J]. 金属学报, 2005, 41(9): 923-928 |
| |
| 作者姓名： | 王晓峰 赵九洲 何杰 王江涛 |
| |
| 作者单位： | 中国科学院金属研究所,沈阳,110016;中国科学院金属研究所,沈阳,110016;中国科学院金属研究所,沈阳,110016;中国科学院金属研究所,沈阳,110016 |
| |
| 基金项目： | 国家自然科学基金资助项目50395104 |
| |
| 摘 要： | 在群体动力学的基础上,提出了描述Cu-13.5%Sn（质量分数）合金雾化液滴凝固过程的动力学模型;并将其与液滴的传热方程和运动方程相耦合,对雾化液滴的冷却凝固过程进行了模拟分析,探讨了液滴尺寸、气体初始速度、熔体过热度和初生相与异质形核基底间润湿角对液滴凝固行为的影响.模拟结果表明：本模型能够很好地描述雾化液滴的凝固过程;液滴冷却至一定温度开始形核,随后晶粒长大;液滴直径越小,冷却速度越快,液滴内晶粒数量密度就越高,凝固结束时晶粒亦越细小.形核润湿角和熔体过热度的增加,导致液滴内晶粒数量密度降低,晶粒半径增大;而气体初始速度的增加,有利于液滴内晶粒细化.
|
| 关 键 词： | Cu-13.5 Sn合金 喷射成形 群体动力学 模拟 |
| 文章编号： | 0412-1961（2005）09-0923-06 |
| 收稿时间： | 2005-03-24 |
| 修稿时间： | 2005-03-242005-05-19 |
MODELING OF SOLIDIFICATION PROCESS OF THE GAS-ATOMIZED Cu-13.5%Sn ALLOY DROPLETS |
| |
| WANG Xiaofeng,ZHAO Jiuzhou,He Jie,WANG Jiangtao. MODELING OF SOLIDIFICATION PROCESS OF THE GAS-ATOMIZED Cu-13.5%Sn ALLOY DROPLETS[J]. Acta Metallurgica Sinica, 2005, 41(9): 923-928 |
| |
| Authors: | WANG Xiaofeng ZHAO Jiuzhou He Jie WANG Jiangtao |
| |
| Affiliation: | Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016 |
| |
| Abstract: | Based on the population dynamic method a model has been developed to describe the solidification process and the thermal histories of gas-atomized droplets. The model is coupled with the droplets' heat transfer controlling equation and the droplets' motion controlling equation, and used in Cu-13.5%Sn (mass fraction) alloy. The effects of the droplet size, the initial gas velocity, the superheat of the melt and the wetting angle between the primary phase and the catalyzing substrate for heterogeneous nucleation on droplet solidification behaviors were discussed. |
| |
| Keywords: | Cu-13.5%Sn alloy spray forming population dynamics modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《金属学报》浏览原始摘要信息 |
|
点击此处可从《金属学报》下载全文 |
|
