| 高频高B_s MnZn功率铁氧体烧结氧分压控制 |
| |
| 引用本文： | 张小杭,奥谷克伸,吕飞雨,刘志坚.高频高B_s MnZn功率铁氧体烧结氧分压控制[J].磁性材料及器件,2009,40(5):58-60. |
| |
| 作者姓名： | 张小杭 奥谷克伸 吕飞雨 刘志坚 |
| |
| 作者单位： | 浙江东磁股份有限公司,浙江东阳,322118 |
| |
| 摘 要： | 用氧化物陶瓷工艺制备高频MnZn功率铁氧体材料,在烧结升温、保温段采用五种不同的氧分压进行烧结.通过测试各样品的起始磁导率、功耗及饱和磁通密度、剩余磁通密度,确定较合适的升温烧结氧分压.结果表明,升温阶段、致密化区氧分压控制在0.1%～1%为宜,这为此类材料的成功量产提供指导.
|
| 关 键 词： | Mn-Zn铁氧体 烧结 氧分压 磁性能 |
Control of the Partial Oxygen Pressure of Sintering of High Frequency High B_s Mn-Zn Power Ferrites |
| |
| ZHANG Xiao-hang,K.Okutani,LV Fei-yu,LIU Zhi-jian.Control of the Partial Oxygen Pressure of Sintering of High Frequency High B_s Mn-Zn Power Ferrites[J].Journal of Magnetic Materials and Devices,2009,40(5):58-60. |
| |
| Authors: | ZHANG Xiao-hang KOkutani LV Fei-yu LIU Zhi-jian |
| |
| Affiliation: | ZHANG Xiao-hang,K.Okutani,LV Fei-yu,LIU Zhi-jian Hengdian Group DMEGC Magnetics Co,Ltd,Dongyang 322118,China |
| |
| Abstract: | High frequency Mn-Zn power ferrite was prepared by conventional oxide method. The samples were sintered under five different partial oxygen pressure in temperature rising and preservation. The initial permeability,power loss,and saturation and residual magnetic induction of the samples were measured to determine the proper partial oxygen pressure. The result indicated that 0.1%-1% is the proper partial oxygen pressure in temperature rising and preservation of sintering. This supplies instructive guidance to... |
| |
| Keywords: | Mn-Zn ferrites sintering partial oxygen pressure properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
