首页 | 本学科首页   官方微博 | 高级检索  
     

水性聚氨酯乳液的制备与性能研究
引用本文:邱圣军,吴晓青,卫晓利. 水性聚氨酯乳液的制备与性能研究[J]. 胶体与聚合物, 2006, 24(1): 26-28
作者姓名:邱圣军  吴晓青  卫晓利
作者单位:中北大学化学工程系,太原,030051
摘    要:以甲苯二异氰酸酯(TD I),耐低温聚醚二醇和二羟甲基丙酸(DM PA)为主要原料,制得不含或含少量有机溶剂的单组分水性聚氨酯乳液。探讨了预聚体的合成工艺路线,研究了NCO/OH比例、DM PA含量等对水性聚氨酯乳液性能的影响。结果表明,当NCO/OH=2.5,DM PA=5%时,乳液性能最佳。

关 键 词:水性聚氨酯  乳液  单组分
收稿时间:2005-10-18
修稿时间:2005-10-18

Study on the synthesis and properties of water-borne polyurethane emulsion
Qiu shengjun,Wu xiaoqing,Wei xiaoli. Study on the synthesis and properties of water-borne polyurethane emulsion[J]. Chinese Journal of Colloid and Polymer, 2006, 24(1): 26-28
Authors:Qiu shengjun  Wu xiaoqing  Wei xiaoli
Affiliation:North university of china Department of Chemical Engineering Taiyuan 030051
Abstract:Water-borne polyurethane emulsion was prepared from Polyether polyol,toluene dissocynate(TDI),2,2-dimethyopropionic acid(DMPA)and so on.The influences of nNCO/nOH(R value)and the amount of DMPA on the mechanical properties of polyurethane emulsion were studied.The results show that the performances of emulsion is optimum when R value is 2.5 and the amount of DMPA is 5%.
Keywords:
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号