|
|||||
|
|
| 渐开线环形齿球齿轮的几何建模及其齿面方程研究 | |
| 引用本文： | 姚齐水,李常义,潘存云. 渐开线环形齿球齿轮的几何建模及其齿面方程研究[J]. 机械设计与研究, 2006, 22(2): 60-63 |
| 作者姓名： | 姚齐水 李常义 潘存云 |
| 作者单位： | 1. 株洲工学院,机械工程学院,株洲,412008;国防科学技术大学,机械CAD与仿真实验室,长沙,410073 2. 国防科学技术大学,机械CAD与仿真实验室,长沙,410073;航空工业总公司,中南传动机械厂技术中心,长沙,望城,410200 3. 国防科学技术大学,机械CAD与仿真实验室,长沙,410073 |
| 基金项目： | 中国科学院资助项目;湖南省重点学科建设项目 |
| 摘 要： | 球齿轮的几何模型及其齿廓曲面方程是对其进行实体建模、有限元分析、齿廓曲面特征分析、运动学及其动力学分析等的基础,但目前相关的研究工作没有深入进行。从渐开线环形齿球齿轮的形成原理出发,提出了一种不同于文献[1]的几何模型构建方法;详细研究了各分块齿侧曲面及其母线在统一中心直角坐标系下的参数方程,导出了各分块曲面的参数方程,所得各项研究结果对相关研究的进一步深入展开具有重要参考意义。 |
| 关 键 词： | 机械传动 球齿轮 齿面方程 几何建模 |
| 文章编号： | 1006-2343(2006)02-060-04 |
| 收稿时间： | 2005-03-28 |
| 修稿时间： | 2005-03-28 |
Research on the Tooth- flank Equation and Geometry Modelling of the Involute Spherical Gear |
|
| YAO Qi-shui,LI Chang-yi,PAN Cun-yun. Research on the Tooth- flank Equation and Geometry Modelling of the Involute Spherical Gear[J]. Machine Design and Research, 2006, 22(2): 60-63 | |
| Authors: | YAO Qi-shui LI Chang-yi PAN Cun-yun |
| Affiliation: | 1. Department of Mechanical Engineering, Zhuzhou Institute of Technology, Zhuzhou 412008, China; 2. Laboratory of Mechanism CAD and Simulation, the National University of Defense Technology, Changsha 410073, China; 3. Research - Department of the Zhongnan Transmision Faetoray of the Air Industry Parent Company, Wangeheng, Changsha, 410200, China |
| Abstract: | The spherical gear geometry modeling and its tooth flank equation are the foundations of its physical entity modeling,finite element analysis,tooth flank geometry characteristic analysis,kinematics and dynamics analysis and so on. However there is no deep research work on such gears until now. Starting from studying the principium of the involute spherical gear, we have brought forward a different geometry modeling method in this paper from the previous paper ;and then, after detailedly researching on the segmental surfaces over teeth parameter equation and its generatrix parameter equation in one uniform center coordinates - oxyz, we have gotten the parameter equations of segmental curve surfaces. Results from this paper will be useful for further research. |
| Keywords: | mechanism transmission spherical gear tooth flank equation geometry modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |