| 350MW超临界机组调试中存在的问题分析及处理 |
| |
| 引用本文： | 刘国弼,赵峰,刘俊峰,王宏杰,陈坤. 350MW超临界机组调试中存在的问题分析及处理[J]. 河北电力技术, 2013, 0(6): 39-41 |
| |
| 作者姓名： | 刘国弼 赵峰 刘俊峰 王宏杰 陈坤 |
| |
| 作者单位： | [1]西安热工研究院有限公司,西安710032 [2]中国华电富拉尔基发电厂,黑龙江齐齐哈尔161041 [3]新疆阿拉尔盛源热电厂,新疆阿拉尔843300 |
| |
| 摘 要： | 对1号机组在调试过程中出现的轴承烧瓦、轴振较大、低压转子轴承金属温度偏高等问题进行分析，认为轴承自定位性能较差，汽封与转子碰磨，5号、6号轴承设计标高偏高是故障的主要原因，提出更换新瓦，控制冲转参数，降低5号、6号轴承标高等处理措施，说明处理效果，并提出相应建议。
|
| 关 键 词： | 超临界机组 烧瓦 轴振 |
Problems Analysis and Treatment During Commissioning of 350 MW Supercritical Unit |
| |
| Abstract: | After analysis on shaft hearing buring, large shaft vibration, high temperature of low-pressure rotor hearing metal of No.1 unit during commissioning, this paper indicates that the main causes are worse shaft self-localization per- formance, the rub of the seal and the rotor, high design level of No. 5 and No. 6 shafts, proposes the settlements, such as replacement of the new bearing, turning parameter control, lowering bearing level, explains the settlements effects, and proposes the corresponding suggestions. |
| |
| Keywords: | supercritical unit ~ bearing burning shaft vibration |
| 本文献已被 维普 等数据库收录！ |
|
