High temperature flexural strength,microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C |
| |
| Affiliation: | 1. Key Laboratory of Advanced Technology for Specially Functional Materials, Ministry of Education, Wuhan University of Technology, Wuhan, 430070, China;2. Hubei Longzhong Laboratory, Xiangyang, 441000, China;3. Hubei Institute of Aerospace Chemistry Technology, China Aerospace Science and Technology Corporation, Xiangyang, 441000, China;1. Institute of Aeronautics and Space, São José dos Campos, SP, 12228-904, Brazil;2. Institute for Advanced Studies, São José dos Campos, SP, 12228-001, Brazil;1. Departamento de Química, ICEx, Universidade Federal de Minas Gerais, 31270-901, Belo Horizonte, MG, Brazil;2. Faculdade de Física, Universidade Federal do Pará, 66075-110, Belém, PA, Brazil;3. Departamento de Física, ICEx, Universidade Federal de Minas Gerais, 31270-901, Belo Horizonte, MG, Brazil;1. Department of Anaerobic Bacterial Vaccine Research and Production, Razi Vaccine and Serum Research Institute, Agricultural Research, Education and Extension Organization (AREEO), P.O. Box: 31975/148, Karaj, Iran;2. Jundi-Shapur Research Institute, Jundi-Shapur University of Technology, Dezful, Iran;3. Department of Chemical Engineering, Jundi-Shapur University of Technology, Dezful, Iran |
| |
| Abstract: | Carbon fiber/phenolic resin composites (CF/Ph) have attracted great interests in the field of thermal protection materials for their characteristics of high specific strength and easy manufacturing. However, CF/Ph are inherently susceptible to oxidation failure at elevated temperatures. In this study, a novel Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C was fabricated by an impregnating and compression molding route. Thermal stability, flexural strength, microstructure and phase evolution of the resulting ceramizable composite were studied. The residue yield at 1400 °C and flexural strength after treated at 1400 °C for 15min was 90.4% and 53.1 MPa, respectively, which was increased by 15.9% and 532.1% than that without ceramizable fillers. Surface defects generated by matrix pyrolysis were well healed, and PyC and carbon fibers were covered with dense ceramic layers while the fracture surface was covered with relatively continuous ceramic layers without visible pores. Multiphase ceramics composed of TiB2, TiO2, TiC and PyC were identified. Furthermore, oxidation failure and anti-oxidation mechanism was revealed based on the aforementioned characterizations and thermodynamic calculation results. Oxidation resistance got enhanced markedly for synergistic effects of oxygen consuming, carbon fixation, oxygen barrier and endothermic effect, which were derived from ceramization reactions between TiB2, B4C, O2, Al and PyC. |
| |
| Keywords: | Ceramizable composite B Failure analysis C Corrosion C Mechanical properties E Thermal applications |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
