首页 | 本学科首页   官方微博 | 高级检索  
     

基于FPGA和ARM核处理器的外设接口
引用本文:吴平,李波,曹晓琳,刘健,丁铁夫. 基于FPGA和ARM核处理器的外设接口[J]. 兵工自动化, 2004, 23(5): 56-58
作者姓名:吴平  李波  曹晓琳  刘健  丁铁夫
作者单位:中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033;中国科学院,研究生院,北京,100039;吉林省建设银行,信息技术部,吉林,长春,130061;中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033
基金项目:中国科学院知识创新工程项目
摘    要:基于FPGA和ARM核处理器的通讯终端与外围设备的硬件接口以S3C4510B为控制核心.终通讯端采用PCM、ARM-DSP、OLED及KEY模块逻辑电路设计,并用ALTERA 1K30扩展和简化S3C4510B外设接口电路及与PCM编码器的接口电路.通过1K30的内部逻辑电路提供控制信号、键盘行列扫描信号、PCM语音编码的时钟信号和各数据交换通道,完成语音数据的串并转换功能.

关 键 词:现场可编程门阵列  ARM  S3C4510B  接口设计
文章编号:1006-1576(2004)05-0056-03
修稿时间:2004-03-24

Design of Peripheral Interface Based on FPGA and ARM Core Processor
WU Ping,,LI Bo,CAO Xiao-lin,,LIU Jian,DING Tie-fu. Design of Peripheral Interface Based on FPGA and ARM Core Processor[J]. Ordnance Industry Automation, 2004, 23(5): 56-58
Authors:WU Ping    LI Bo  CAO Xiao-lin    LIU Jian  DING Tie-fu
Affiliation:WU Ping1,2,LI Bo3,CAO Xiao-lin1,2,LIU Jian1,DING Tie-fu1
Abstract:S3C4510B is used as control core in hardware interface between communication terminal and peripheral equipment based on field programmable gate array (FPGA) and ARM core processor. Communication terminal was designed with PCM, ARM-DSP, OLED and logic circuit of KEY model, and interface circuits of peripheral equipment of S3C4510B and PCM coder were expanded and simplified with ALTERA 1K30. Control signal, scanning signal of keyboard, clock signal of PCM voice coding and all sorts of data interchange channel were supplied and the serial-parallel switching of voice data of PCM was realized through inside logic circuit of 1K30.
Keywords:FPGA  ARM  S3C4510B  Interface design  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号