Studies on the friction and transfer of semicrystalline polymers

The friction and transfer of various semi-crystalline polymers were studied in several experiments. The cylindrical surfaces of polymers were slid over glass plates at low speed and under constant load. The kinetic friction of PTFE in repeated traverses did not vary with the number of traverses and the transfer of PTFE occurred successively on previously transferred PTFE films. The film transferred at each traverse was extremely thin (< 50 Å). The friction of PTFE decreased with increased humidity in the environment and appeared to be independent of crystalline transitions. Other polymers exhibited higher friction than PTFE and their transfer was generally as small lumps or short streaks. HDPE displayed a very low friction, although the friction of ultrahigh molecular weight polyethylene (UHDPE) was somewhat higher than that of HDPE. With HDPE and UHDPE, as well as with PTFE, long films stretched from one side of the abrasion grooves produced on the polymer frictional surfaces to the other side, like a bridge. The static friction of the three different polymers was very sensitive to the direction of prerubbing on the frictional surfaces and the static friction in sliding parallel to the pre-rubbing direction was much smaller than that perpendicular to it. The roles of the molecular profile and of the banded or spherulitic structure of the polymers in the polymer transfer mechanism are discussed on the basis of the experimental results obtained.