首页 | 本学科首页   官方微博 | 高级检索  
     

20钢多元共渗后的耐腐蚀性能
引用本文:周海,杨英歌,陈飞,万汉城,奚明.20钢多元共渗后的耐腐蚀性能[J].机械工程材料,2007,31(8):49-50.
作者姓名:周海  杨英歌  陈飞  万汉城  奚明
作者单位:北京石油化工学院材料科学与工程系,北京,102617;北京石油化工学院材料科学与工程系,北京,102617;北京石油化工学院材料科学与工程系,北京,102617;北京石油化工学院材料科学与工程系,北京,102617;北京石油化工学院材料科学与工程系,北京,102617
摘    要:采用低温气体多元共渗技术在20钢表面同时渗入碳、氮、氧三种元素,利用X射线衍射仪(XRD)测定了渗层的相组成;另外测试了渗层在浓度为1.0 mol/L HCl溶液中的耐蚀性.结果表明:渗层以氧化物、氮化物和碳化物为主,且氮化物居多,其腐蚀速率明显低于基体材料的腐蚀速率.

关 键 词:20钢  多元共渗  耐蚀性
文章编号:1000-3738(2007)08-0049-02
修稿时间:2006-10-172007-08-14

Corrosion Resistance of Multi-element Penetrated 20 Steel
ZHOU Hai,YANG Ying-ge,CHEN Fei,WAN Han-cheng,XI Ming.Corrosion Resistance of Multi-element Penetrated 20 Steel[J].Materials For Mechanical Engineering,2007,31(8):49-50.
Authors:ZHOU Hai  YANG Ying-ge  CHEN Fei  WAN Han-cheng  XI Ming
Affiliation:Beijing Institute of Petro-Chemical Technology, Beijing 102617, China
Abstract:Corrosion performance of 20 steel was improved by low temperature gas multi-element penetration technique. Carbon, nitrogen and oxygen were infiltrated into the material. The phase constituents of the alloying layer were investigated by XRD. The corrosion resistance of the penetrated layer and original material was compared by electrochemical method in 1.0 mol/L HC1 solution. The results show that the penetrated layer consists of oxide, nitride and carbide. Among them the nitride is predominant. In comparison with the original material, the penetrated layer has much better corrosion resistance and lower corrosion rat .
Keywords:20 steel  multi-element penetration  corrosion resistance
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号