首页 | 本学科首页   官方微博 | 高级检索  
     


Rheological and technological properties of titanium dioxide slips and the properties of the castings
Authors:L I Verba  É V Degtyareva
Affiliation:(1) Ukrainian Scientific-Research Institute of Refractories, Ukraine
Abstract:Conclusions An investigation of the rheological and technological properties of titanium dioxide slips and slip castings demonstrated the presence of two castability regions. The properties of the slip and castings are optimal in the alkaline castability region (pH 8).A study of the influence of the firing temperature of the titanium dioxide starting material on the properties of the slip and castings showed that the properties are optimal when the TiO2 had been fired at 1550° C.An analysis of the sintering of titanium dioxide slip castings showed that the properties of the sintered castings are optimal when the castings were produced from slip with pH 8 because in this case the density of the castings is at maximum.The strength of TiO2 castings in the sintering process depends on their porosity and that of the sintered castings on the size of the crystals.Titanium dioxide fired at 1550°C yielded castings with open porosity 1.8–2.0%, apparent density 3.90–3.92 g/cm3, sgrb 1020–1050 kgf/cm2, acid resistance 97.5%, specific inductive capacitance 90–100, and tangent of the dielectric loss angle at 20°C and 1 MHz 8·10–4–9·10–4 Translated from Ogneupory, No. 3, pp. 28–33, March, 1978.
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号