首页 | 本学科首页   官方微博 | 高级检索  
     

SiO2/TiO2比值及辅料对钒钛烧结矿软熔滴落性能的影响
引用本文:甘勤,何群,黎建明,姜汉武,孙康. SiO2/TiO2比值及辅料对钒钛烧结矿软熔滴落性能的影响[J]. 钢铁, 2000, 35(4): 1-4
作者姓名:甘勤  何群  黎建明  姜汉武  孙康
作者单位:1. 攀枝花钢铁研究院
2. 攀枝花钢铁(集团)公司
摘    要:在实验室模拟攀钢现场条件,研究了提高SiO2/TiO2比值(增加富矿粉配比)和添加萤石,氧化锰,重晶石,硼泥等辅料对钒钛烧结矿软熔落性能的影响。结果表明,提高SiO2/TiO2比值和添加萤石,氧化锰、重晶石,硼泥等辅料均有利于改善钒钛烧结矿软熔滴落性能。

关 键 词:辅料 钒钛烧结矿 软溶滴落性能 富矿粉配比

IMPACT OF SiO2/TiO2 RATIO AND ADDITION OF AUXILIARY MATERIALS ON SOFTENING DROPPING OF V-BEARING TITANIFEROUS MAGNETITE SINTER
GAN Qin,HE Qun,LI Jianming,JIANG Hanwu,SUN Kang. IMPACT OF SiO2/TiO2 RATIO AND ADDITION OF AUXILIARY MATERIALS ON SOFTENING DROPPING OF V-BEARING TITANIFEROUS MAGNETITE SINTER[J]. Iron & Steel, 2000, 35(4): 1-4
Authors:GAN Qin  HE Qun  LI Jianming  JIANG Hanwu  SUN Kang
Affiliation:GAN Qin HE Qun LI Jianming (Panzhihua Iron and Steel Research Institute) JIANG Hanwu SUN Kang (Panzhihua Iron and Steel (Group) Co.)
Abstract:On the basis of simulation in lab,the impact of increased SiO 2/TiO 2 ratio(i.e.rise of rich ore fines ratio)and auxiliary materials(such as fluoxide,manganese oxide,baryte and boride) on softening dropping of V bearing titaniferous magnetite sinter was investigated.Experimental results suggest that increase of the SiO 2/TiO 2 ratio and addition of auxiliaty materials are favorable to improving the softening dropping property of the sinter.
Keywords:SiO 2/TiO 2 ratio   auxiliary material  V bearing titaniferous magnetite sinter  softening dropping property
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号