| 基于改进纤维模型的RC剪力墙静力弹塑性分析 |
| |
| 引用本文： | 朱立猛,周德源,张强. 基于改进纤维模型的RC剪力墙静力弹塑性分析[J]. 沈阳工业大学学报, 2012, 34(1): 94-98 |
| |
| 作者姓名： | 朱立猛 周德源 张强 |
| |
| 作者单位： | 同济大学土木工程防灾国家重点实验室;同济大学结构工程与防灾研究所;上海师范大学建筑工程学院 |
| |
| 基金项目： | 科技部国家重点实验室基金资助项目(SLDRCE09-D-03) |
| |
| 摘 要： | 为了使纤维模型能够有效模拟剪切效应，提出了一种基于塑性理论和虚拟单元法的改进纤维模型RC剪力墙全过程静力弹塑性分析方法.推导出等效单轴应力和等效单轴应变的计算公式，在纤维层面建立考虑剪切效应的应力和应变关系，将纤维由多轴受力状态等效为单轴受力状态，引入虚拟单元法来解决有限元数值计算过程中遇到的负刚度问题.利用自编程序及ABAQUS软件对一片钢筋混凝土剪力墙进行静力弹塑性分析，结果表明，自编程序计算曲线与试验曲线及ABAQUS软件计算曲线吻合较好，能够反映出剪切效应的影响.改进的分析方法简便有效，便于编程，可用于分析剪切效应明显的钢筋混凝土剪力墙构件.
|
| 关 键 词： | 纤维模型 钢筋混凝土剪力墙 塑性理论 虚拟单元法 剪切效应 等效单轴应力 等效单轴应变 静力弹塑性分析 |
Static elasto-plastic analysis for RC shear wall based on improved fiber model |
| |
| ZHU Li-meng,a,b,ZHOU De-yuan,a,b,ZHANG Qiang. Static elasto-plastic analysis for RC shear wall based on improved fiber model[J]. Journal of Shenyang University of Technology, 2012, 34(1): 94-98 |
| |
| Authors: | ZHU Li-meng a b ZHOU De-yuan a b ZHANG Qiang |
| |
| Affiliation: | 1a,2(1a.State Key Laboratory of Disaster Reduction in Civil Engineering,1b.Institute of Structural Engineering and Disaster Reduction,Tongji University,Shanghai 200092,China;2.School of Architecture Engineering,Shanghai Normal University,Shanghai 201418,China) |
| |
| Abstract: | In order to ensure the effective simulation of fiber model on the shear effect,a full static elasto-plastic analysis method for reinforced concrete(RC) shear wall with the improved fiber model based on plastic theory and virtual-element method was proposed.The calculation formulas for the equivalent uniaxial stress and strain were derived to establish the stress-strain relationship with considering the shear effect in the fiber layer.The multiaxial stress state of the fiber was equivalently converted into the uniaxial stress state.The virtual-element method was introduced to solve the negative stiffness problem in the finite element calculation process.The self-compiled program and ABAQUS software were used to carry out the static elasto-plastic analysis for a RC shear wall.The results indicate that the curves calculated with the self-compiled program are well accordant to those attained with both experiment and ABAQUS software,and can reflect the influence of shear effect.The improved analysis method is simple and effective as well as easy in programming,and can be applied to analyze the RC shear wall components with obvious shear effect. |
| |
| Keywords: | fiber model reinforced concrete(RC) shear wall plastic theory virtual-element method shear effect equivalent uniaxial stress equivalent uniaxial strain static elasto-plastic analysis |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《沈阳工业大学学报》浏览原始摘要信息 |
|
点击此处可从《沈阳工业大学学报》下载全文 |
