首页 | 本学科首页   官方微博 | 高级检索  
     

基于渐扩管流阻理论的双梯形筛管割缝结构研究
引用本文:李夯,刘永红,王亚洲,马建民. 基于渐扩管流阻理论的双梯形筛管割缝结构研究[J]. 石油机械, 2012, 40(6): 70-73
作者姓名:李夯  刘永红  王亚洲  马建民
作者单位:中国石油大学华东机电工程学院
基金项目:国家自然科学基金资助项目“可自适应膨胀防砂筛管及其应用技术基础研究”(50874115);国家863计划项目“3000米深水防喷器组及控制系统的研制”(2007AA09A101)
摘    要:鉴于目前对割缝筛管的双梯形缝局部阻力损失研究较少的状况,运用渐扩管流动阻力理论,提出基于阻力系数的双梯形缝隙的设计方法,并分别用理论计算与仿真计算方法进行了相应的研究对比。分析结果表明,双梯形缝总阻力系数随扩散角的变化而变化,对于给定入口雷诺数与合适转折宽度的情况下,总存在最佳扩散角使总阻力最小;最佳扩散角随入口雷诺数的不同而不同,在常见的雷诺数范围内,雷诺数越大,最佳扩散角越大。

关 键 词:双梯形缝  渐扩管  扩散角  转折宽度

Research on Dual Trapezoid Screen Slot Structure
Li Hang Liu Yonghong Wang Yazhou Ma Jianmin. Research on Dual Trapezoid Screen Slot Structure[J]. China Petroleum Machinery, 2012, 40(6): 70-73
Authors:Li Hang Liu Yonghong Wang Yazhou Ma Jianmin
Affiliation:Li Hang Liu Yonghong Wang Yazhou Ma Jianmin(College of Electromechanical Engineering,China University of Petroleum,Dongying)
Abstract:There is currently less research on local resistance loss of dual trapezoidal slot.Therefore,the conical diffuser flow resistance theory was adopted to propose the design method for dual trapezoidal slot on the basis of resistance coefficient.The comparative study was conducted with the methods of theoretical calculation and simulation calculation.The analysis shows that the total resistance coefficient of dual trapezoidal slot changes with diffusion angle.Given the inlet Reynolds numbers and suitable turning width,there always exists the optimal diffusion angle which minimizes the total resistance.The optimal diffusion angle differs with the inlet Reynolds numbers.Within the scope of common Reynolds numbers,the greater the Reynolds number,the larger the optimal diffusion angle.
Keywords:dual trapezoidal slot  conical diffuser  diffusion angle  turning width
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号