DESIGN AND CAD SYSTEM OF THE FOOL FOR DRILL FLUTE |
| |
Authors: | XIANG Wenjiang ZHOU Zhixiong CAO Zhaozhan YAN Lan |
| |
Affiliation: | [1]College of Mechanical and Automotive Engineering, Hunan University, Changsha 410082, China [2]Department of Mechanical Engineering Shaoyang College, Shaoyang 422000, China |
| |
Abstract: | Based on the principles of differential geometry and kinematics, a mathematical model is developed to describe the grinding wheel axial cross-section with the radial cross-section of the flute in a given drill under the basic engagement condition between the generating flute and the generated grinding wheel (or disk milling tool). The mathematical model is good for the flute in the radial cross-section consisting of three arcs. Furthermore, a CAD system is also developed to represent the axial cross-section of the grinding wheel (or disk milling tool). With the system, the grinding wheel (or disk milling tool) axial cross-section that corresponds to the three-arc flute cross section can be conveniently simulated. Through the grinding experiment of drill flutes, the method and the CAD system are proved to be feasible and reasonable. |
| |
Keywords: | Drill flute Grinding wheel Mathematical model CAD system TOOL CAD SYSTEM method feasible reasonable grinding wheel experiment cross section simulated CAD system represent good arcs disk milling tool mathematical model axial radial basic |
本文献已被 维普 万方数据 等数据库收录! |
|