车前草多糖的脱色工艺研究 |
| |
引用本文: | 廖春燕,黄敏,黄瑶,杨远萍.车前草多糖的脱色工艺研究[J].广州食品工业科技,2012(8):1028-1030,974. |
| |
作者姓名: | 廖春燕 黄敏 黄瑶 杨远萍 |
| |
作者单位: | [1]广西工学院生物与化学工程系,广西柳州5450062 [2]广东轻工职业食品与生物工程系,广东广州510300 |
| |
摘 要: | 以脱色率和多糖保留率为指标,采用活性炭和大孔吸附树脂两种方法对车前草多糖脱色。结果表明,活性炭脱色的最佳条件为:在60℃下,加入0.75%(m/V)的活性炭,脱色30min,在此工艺条件下脱色率为76.22%,多糖保留率为65.31%。大孔吸附树脂脱色的最佳条件是:以蒸馏水为洗脱剂,样pH值为8.0,洗脱流速为2mL/min,洗脱液体积为3BV(1BV=20mL),在此工艺条件下脱色率为79.78%,多糖保留率为89.76%。大孔吸附树脂脱色效果优于活性炭脱色效果。
|
关 键 词: | 车前草 多糖 脱色 活性炭 AB-8大孔吸附树脂 |
Decoloring Process of Polysaccharide Extracted from Plantago asiatica L |
| |
Authors: | LIAO Chun-yan HUANG Min HUANG Yao YANG Yuan-ping |
| |
Affiliation: | 1 .Department of biological and chemical Engineering of Guangxi University of Technology, Liuzhou 545006, China) (2.Department of food bioengineering, Guangdong Industry Technical College, Guangzhou 510300, China) |
| |
Abstract: | The decoloring methods with active carbon and AB-8 macroporous adsorption resin were compared for polysaccharide extracted from Plantago asiatica L was decolored by analyzing the decoloration rate and polysaccharide retention rate. The results showed that the best conditions for decoloration with active carbon were: 0.75% active carbon, decoloring temperature 60℃ and treatment time 30min, under which the decolorization rate was 76.22% and the polysaccharide retention rate was 65.31%. The best conditions for AB-8 macroporous adsorption resin were as follows: the elution solvent 3 BV (1 BV=20 mL), flow rate 2 mL/min, and pH of polysaccharide solution 8.0, under which the decolorization rate was 79.78% and the polysaccharide retention rate was 89.76%. The decoloration with macroporous adsorption resin was better than that with active carbon. |
| |
Keywords: | Plantago asiatica L polysaccharide decolomtion active carbon AB-8 macroporous adsorption resin |
本文献已被 维普 等数据库收录! |
|