| 盖架注射模设计 |
| |
| 引用本文： | 艾福南. 盖架注射模设计[J]. 模具工业, 2001, 1(1): 31-33 |
| |
| 作者姓名： | 艾福南 |
| |
| 作者单位： | 深圳石岩上屋电业有限公司 |
| |
| 摘 要： | 通过对盖架塑件的结构和工艺分析 ,进行了模具设计 ,模具采用了斜推块抽芯、斜导柱抽芯、弹簧抽芯、液压抽芯等机构 ,从而使模具结构简单合理。
|
| 关 键 词： | 注射模 分型面 抽芯 滑块 斜推块 |
| 修稿时间： | 2000-08-10 |
Design of the Injection Mould for Cover Frames |
| |
| Ai Funan. Design of the Injection Mould for Cover Frames[J]. Die & Mould Industry, 2001, 1(1): 31-33 |
| |
| Authors: | Ai Funan |
| |
| Abstract: | Through the analysis of the structure and technological process of the cover frame plastic parts, a mould was designed. The slanted ejecting block core-pulling, slanted guiding pillar core-pulling, spring core-pulling, and hydraulic core-pulling mechanisms were adopted in the die, and thus made the die simple and reasonable in its structure. |
| |
| Keywords: | injection mould parting line core-pulling slide slanted ejecting block |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
