| 杆形拉深件模具设计的新探讨 |
| |
| 引用本文： | 彭丽华.杆形拉深件模具设计的新探讨[J].机械设计与制造,2009(6). |
| |
| 作者姓名： | 彭丽华 |
| |
| 作者单位： | 娄底职业技术学院,娄底,417000 |
| |
| 摘 要： | 通过拉深成形的研究和试验,发现拉裂总是在某些危险部位最先产生,从而导致整个拉深成形失败,而且这些危险部位的产生与拉深过程中金属的流动趋势有很大的关系.提出了一种通过在拉深过程中某一时刻给工件的侧壁变薄部位主动施加一定的外力,改变侧壁的金属流动趋势,防止变薄区材料尤其是危险断面的进一步变薄,使壁厚变厚处更多地参与变形,拉深件壁厚分布趋向均匀,从而推迟了开裂的产生,拉深件的成形效率也将大大提高.设计制造出了将该途径应用于筒形件拉深的模具,指出了模具设计要点.实践证明,该模具对提高筒形件的拉深效率和质量是切实有效的.
|
| 关 键 词： | 拉深效率 筒形件拉深 模具设计 |
The pole shape drawing mold design discusses newly |
| |
| PENG Li-hua.The pole shape drawing mold design discusses newly[J].Machinery Design & Manufacture,2009(6). |
| |
| Authors: | PENG Li-hua |
| |
| Affiliation: | Loudi professional technology institute;Loudi 417000;China |
| |
| Abstract: | Bytheexperiments,itisfoundthatthelips are always taken place firstly at some dangerous areas duringdrawing,and however,the dangerous areas are due to the asymmetry of deforming.A new method that changes theflow tendency of metal by exerting forces initiatively to improve the efficiency of drawing is introduced.According tothis new method,the die structure for cup drawing is provided,and the key points of design are also given.It is provedby practices that the die can improve the efficiency and quality of cu... |
| |
| Keywords: | Efficiency of drawing Cup drawing Die design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
