Continuous sorption-enhanced steam reforming of glycerol to high-purity hydrogen production

In this study, the continuous sorption-enhanced steam reforming of glycerol to high-purity hydrogen production by a simultaneous flow concept of catalyst and sorbent for reaction and regeneration using two moving-bed reactors has been evaluated experimentally. A Ni-based catalyst (NiO/NiAl₂O₄) and a lime sorbent (CaO) were used for glycerol steam reforming with and without in-situ CO₂ removal at 500 °C and 600 °C. The simultaneous regeneration of catalyst and sorbent was carried out with the mixture gas of N₂ and steam at 900 °C. The product gases were measured by a GC gas analyzer. It is obvious that the amounts of CO₂, CO and CH₄ were reduced in the sorption-enhanced steam reforming of glycerol, and the H₂ concentration is greatly increased in the pre-CO₂ breakthrough periods within 10 min both 500 °C and 600 °C. The extended time of operation for high-purity hydrogen production and CO₂ capture was obtained by the continuous sorption-enhanced steam reforming of glycerol. High-purity H₂ products of 93.9% and 96.1% were produced at 500 °C and 600 °C and very small amounts of CO₂, CH₄ and CO were formed. The decay in activity during the continuous reaction-regeneration of catalyst and sorbent was not observed.