| 预变形退火对钛基非晶复合材料力学性能的影响 |
| |
| 引用本文： | 赵燕春,马文龙,赵志平,黄明源,寇生中,李春燕,袁子洲. 预变形退火对钛基非晶复合材料力学性能的影响[J]. 稀有金属材料与工程, 2017, 46(9): 2366-2370 |
| |
| 作者姓名： | 赵燕春 马文龙 赵志平 黄明源 寇生中 李春燕 袁子洲 |
| |
| 作者单位： | 兰州理工大学,兰州理工大学,兰州理工大学,兰州理工大学,兰州理工大学,兰州理工大学,兰州理工大学 |
| |
| 基金项目： | 国家自然科学基金项目;浙江省自然基金 |
| |
| 摘 要： | 采用磁悬浮熔炼-水冷铜模吸铸法制备出Ti40Ni40Cu20非晶基复合材料板状试样,通过压力试验机对试样进行不同程度的预压缩,然后在150℃、30min下退火,研究了预变形退火工艺对合金微观组织和力学性能的影响。结果表明：奥氏体相在外力作用下发生马氏体相变,形变诱导相变加之退火释放残余热应力从而对非晶基体起到增强增韧的作用。随着预变形程度的增加,马氏体相和奥氏体相均增加,而马氏体相增加的更快,复合材料的屈服强度提高,塑性减小, 塑形阶段预变形能够实现屈服强度可控；
|
| 关 键 词： | Ti基非晶复合材料 力学性能 塑性 |
| 收稿时间： | 2015-07-20 |
| 修稿时间： | 2015-12-04 |
Effects of Pre-Deformation and Annealing on Mechanical Properties of Ti-Based Amorphous Alloys |
| |
| Zhao Yanchun,Ma Wenlong,Zhao Zhiping,Huang Mingyuan,Kou Shengzhong,Li Chunyan and Yuan Zizhou. Effects of Pre-Deformation and Annealing on Mechanical Properties of Ti-Based Amorphous Alloys[J]. Rare Metal Materials and Engineering, 2017, 46(9): 2366-2370 |
| |
| Authors: | Zhao Yanchun Ma Wenlong Zhao Zhiping Huang Mingyuan Kou Shengzhong Li Chunyan Yuan Zizhou |
| |
| Affiliation: | State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,Lanzhou University of Technology |
| |
| Abstract: | |
| |
| Keywords: | Ti-based amorphous composites mechanical properties ductility |
|
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
|
