| T10A钢翻边凸模的复合处理工艺应用 |
| |
| 引用本文： | 唐明华,隆文革. T10A钢翻边凸模的复合处理工艺应用[J]. 机床与液压, 2003, 0(6): 304-305 |
| |
| 作者姓名： | 唐明华 隆文革 |
| |
| 作者单位： | 湖南大学衡阳分校,湖南衡阳,421101 |
| |
| 基金项目： | 湖大衡阳分校科研重点项目资助 (K0 2 0 2 ) |
| |
| 摘 要： | 研究了T10A钢稀土硼钒共渗加淬回火复合处理工艺。生产试验结果表明，翻边凸模经复合热处理后的使用寿命比常规处理的提高了3～5倍。
|
| 关 键 词： | 翻边凸模 复合处理工艺 使用寿命 淬火 回火 T10A钢 热处理 |
| 文章编号： | 1001-3881(2003)6-304-2 |
| 修稿时间： | 2002-12-10 |
Application on Compound Treating Technology for Flanging Die of Steel T10A |
| |
| TANG Ming-hua,LONG Wen-ge. Application on Compound Treating Technology for Flanging Die of Steel T10A[J]. Machine Tool & Hydraulics, 2003, 0(6): 304-305 |
| |
| Authors: | TANG Ming-hua LONG Wen-ge |
| |
| Abstract: | The compound treating technology of quenching and tempering with steel T100A and RE-Born-Aluminizing were studied.The experiments results show that the service life of flanging die treated by this way is three to five times longer than that treated by conventional way. |
| |
| Keywords: | Flanging die Compound treating Service life |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
