首页 | 本学科首页   官方微博 | 高级检索  
     

超声波-化学去污工艺在核电厂的应用研究
引用本文:邬强,崔慧玲,王川.超声波-化学去污工艺在核电厂的应用研究[J].应用化工,2007,36(1):90-92,95.
作者姓名:邬强  崔慧玲  王川
作者单位:1. 中国辐射防护研究院,山西,太原,030006
2. 山西大学,化学系,山西,太原,030006
3. 核电秦山联营有限公司,浙江,海盐,314300
摘    要:基于传统的化学去除放射性污染物的工艺,提出一种超声波与化学去污联合运用的新工艺,经实验室模拟及核电厂的去污实践检验,其放射性去污效果极佳,污染工件经去污后,表面的放射性去污系数达1 750以上,表面接触剂量率也降低至原来的0.5‰以内;对于平行工艺下的316 L不锈钢样片的腐蚀深度测试,结果表明,本工艺对不锈钢的腐蚀性极低(46.1 nm),完全满足核电厂去污工艺腐蚀深度值(≤1μm)的要求。

关 键 词:化学  超声波  去污  工程应用
文章编号:1671-3206(2007)01-0090-03
修稿时间:2006-10-20

Study on application of joint decontamination technology in nuclear power plant
WU Qiang,CUI Hui-ling,WANG Chuan.Study on application of joint decontamination technology in nuclear power plant[J].Applied chemical industry,2007,36(1):90-92,95.
Authors:WU Qiang  CUI Hui-ling  WANG Chuan
Affiliation:1. China Institute for Radiation Protection ,Taiyuan 030006, China ;2. Chemistry Department, Shanxi University, Taiyuan 030006, China;3. Nuclear Power Qinshan Joint Venture Co., Ltd, Haiyan 314300, China
Abstract:A new decontamination technology of contaminated components in nuclear power plant(NPP) was reported.This technology was applied in the decontamination of the sealed plates of steam generator in NPP,and achieved excellent decontamination result(Decontamination factor>1 750,the content of surface contact agent decreased 0.5‰).It indicates very low level corrosion(46.1 nm)to 316 L stainless-steel samples in engineering application,these results meet the decontamination technique corrosion limit(≤1 μm)of NPP.
Keywords:chemistry  ultrasonic  decontamination  engineering application
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号