| 谐波齿轮传动中柔轮载荷分布规律分析研究 |
| |
| 引用本文： | 姜世平,聂绍民,肖瑜,陈谌闻,宋延辉.谐波齿轮传动中柔轮载荷分布规律分析研究[J].机械设计,2001,18(6):11-13. |
| |
| 作者姓名： | 姜世平 聂绍民 肖瑜 陈谌闻 宋延辉 |
| |
| 作者单位： | 1. 燕山大学机械工程学院,
2. 哈尔滨工业大学, |
| |
| 基金项目： | 河北省自然科学基金资助项目 (5951 50 ) |
| |
| 摘 要： | 提出了关于谐波齿轮传动装置中，柔轮啮合区内载荷分布规律的实验与分析新方法。包括三部分：首先，在载荷状态下，通过安装在刚轮径向方向上三个可装、的活齿，测得大量的啮合数据；其次，通过数学统计方法获得啮合区内切向力Ft和径向力Fr的实验曲线；最后，应用函数逼近法获得载荷区内载荷分布方程。
|
| 关 键 词： | 谐波齿轮传动 柔轮 几何大变形 逼近函数 载荷分布方程 |
| 文章编号： | 1001-2354(2001)06-0011-03 |
A study on the analysis of load distribution law of flexible wheel in harmonic gear drive |
| |
| JIANG Shiping et al.A study on the analysis of load distribution law of flexible wheel in harmonic gear drive[J].Journal of Machine Design,2001,18(6):11-13. |
| |
| Authors: | JIANG Shiping |
| |
| Affiliation: | Harbin Institute of Technology |
| |
| Abstract: | A new method of experiment and analysis has been put forward for law of load distribution inside the meshing zone of flexible wheel in the device of harmonic gear transmission.It consists of three parts firstly,a large number of meshing data were measured out through three dismountable teeth installed along the radial direction of rigid wheel under loading status,secondly,the experimental curves of tangential force t and of radial force r inside meshing zone were gained by means of method of mathematical statistics and finally the load distribution equations within loading area were acquired by applying function approximation. |
| |
| Keywords: | Harmonic gear drive Flexible wheel Geometric large deformation Approximation function Load distribution equation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
