负载氧化镧泡沫玻璃脱除水中氟离子

饮用水中过量的氟会对人体造成危害，因此发展成本低、高效率除氟材料对于高氟地区饮用水安全和含氟废水处理很有必要。以泡沫玻璃为载体，采用浸渍法制备了泡沫玻璃负载氧化镧的复合材料。对复合材料组成、表面形貌、镧的溶出率和除氟效果做了表征。结果表明：负载氧化镧7%（质量分数）的泡沫玻璃除氟效果最佳，用100 g的该材料就可以将600 mL废水中的氟离子质量浓度从32 mg/L降至1 mg/L以下，达到了饮用水标准。使用过的复合材料通过草酸溶液处理，于600 ℃下热解，可以使复合材料再生。

Removal of fluoride from water by lanthanum oxide loaded foam glass

Excessive fluoride in drinking water can cause harm to human body.It is necessary to develop low-cost and high efficiency fluoride removal material for drinking water safety.The La（Ⅲ）-loaded foam glass composite was prepared by dip- molding method with foam glass as a carrier.The composition，surface morphology，dissolution rate of lanthanum，and the effect of fluoride removal of the composite material were characterized.Results showed that the best load was 7%（mass frac- tion） lanthanum oxide.The fluoride content of 600 mL waste water could be decreased from 32 mg/L down to 1 mg/L below via 100 g La（Ⅲ）-loaded foam glass composite，which reached the standard for drinking water.After fluoride removal，composite material can be regenerated by the oxalic acid solution treatment and pyrolysis at 600 ℃.