| 无钛热冲压成形钢的连续冷却与等温转变规律 |
| |
| 引用本文： | 耿吴宾,崔青玲,梁佳伟,朱宗伟,张龙超. 无钛热冲压成形钢的连续冷却与等温转变规律[J]. 金属热处理, 2021, 46(12): 149-155. DOI: 10.13251/j.issn.0254-6051.2021.12.024 |
| |
| 作者姓名： | 耿吴宾 崔青玲 梁佳伟 朱宗伟 张龙超 |
| |
| 作者单位： | 东北大学轧制技术及连轧自动化国家重点实验室,辽宁沈阳 110819;育材堂(苏州)材料科技有限公司,江苏苏州 215000;东北大学轧制技术及连轧自动化国家重点实验室,辽宁沈阳 110819;西昌钢钒有限公司,四川西昌 615000 |
| |
| 基金项目： | 攀西试验区第四批项目——钒纳米析出韧化2 GPa热冲压钢开发 |
| |
| 摘 要： | 利用Thermo-Calc热力学软件(TCFE 9数据库)、DIL805A/D变形热膨胀相变仪和场发射扫描电镜(FE-SEM)研究了连续冷却转变及等温转变过程中无钛热冲压成形钢的微观组织演化规律。结果表明:试验钢的Ac1=749 ℃,Ac3=863 ℃。绘制了CCT曲线和TTT曲线;无钛热冲压成形钢的马氏体相变开始温度Ms=385 ℃,马氏体相变结束温度Mf=130 ℃。过冷奥氏体冷却过程中,发生马氏体相变的临界冷却速度为5 ℃/s;当等温温度高于750 ℃时,热冲压成形后可获得全马氏体组织。
|
| 关 键 词： | 无钛热冲压成形钢 连续冷却转变 等温转变 临界冷却速度 |
| 收稿时间： | 2021-07-22 |
Law of continuous cooling transformation and isothermal transformation of titanium-free hot stamping steel |
| |
| Geng Wubin,Cui Qingling,Liang Jiawei,Zhu Zongwei,Zhang Longchao. Law of continuous cooling transformation and isothermal transformation of titanium-free hot stamping steel[J]. Heat Treatment of Metals, 2021, 46(12): 149-155. DOI: 10.13251/j.issn.0254-6051.2021.12.024 |
| |
| Authors: | Geng Wubin Cui Qingling Liang Jiawei Zhu Zongwei Zhang Longchao |
| |
| Affiliation: | 1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang Liaoning 110819, China;2. Yucaitang Suzhou Material Technology Co., Ltd., Suzhou Jiangsu 215000, China;3. Xichang Steel and Vanadium Co., Ltd., Xichang Sichuan 615000, China |
| |
| Abstract: | Using Thermo-Calc thermodynamics software (TCFE 9 database), DIL805A/D deformation thermal expansion phase changer and field emission scanning electron microscope (FE-SEM), the law of microstructure evolution of a titanium-free hot stamping steel during continuous cooling transformation and isothermal transformation was studied. The results show that the Ac1 and Ac3 of the steel is 749 ℃ and 863 ℃, respectively, and the corresponding CCT curve and TTT curve are drawn. The martensitic transformation start temperature of the titanium-free hot stamping steel is 385 ℃, and the martensitic transformation finish temperature is 130 ℃. During the cooling process of supercooled austenite, the critical cooling rate for martensite transformation is 5 ℃/s; when the isothermal temperature is higher than 750 ℃, the full martensite structure can be obtained after hot stamping. |
| |
| Keywords: | titanium-free hot stamping steel continuous cooling transformation isothermal transformation critical cooling rate |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载免费的PDF全文 |
|
